Recent content by ohiowa

  1. O

    2n wrist pins & bushings

    Great! I just missed them on this site. looks like I will have to have a shop ream them to 0.75"
  2. O

    2n wrist pins & bushings

    the overhaul kit i bought from here have the new pins. I just need the bushings. My 2n has .002 over pins in it. So I misspoke be for, just need std. bushings.
  3. O

    2n wrist pins & bushings

    I have looked but can't find just piston pins and bushings for 46 2n. Does anyone know?
  4. O

    O.T. GMC dash lights

    long shot. Faulty grounds can cause strange things to occur. Say those lights have a weak ground, but enough to light. if that ground is shared with other lights that come on at night they could cause the ground to fully open and then nothing works. Check that tail lights and others that are...
  5. O

    2n oil pressure relief plunger

    Ok, great! Just thought it was odd
  6. O

    2n oil pressure relief plunger

    on disassembly I noticed this flat spot on the plunger. Is it supposed to be there? there is no way i did this removing it. this tractor has 30psi on start up and about 25psi after 2 hours mowing.
  7. O

    2n cylinder kits

    Gentlemen, they got back to me and here is the difference. 189636 is from Reliance Power And 130779 SMA Midwest.
  8. O

    2n cylinder kits

    yes, they are .090". It's a 46 2n. I have the sleeves out. I'll call them and let you know what they say.
  9. O

    2n cylinder kits

    for a 2n, what is the difference between kit #130779 and kit #189636 ?? maybe same kit but two different manufacturers?
  10. O

    FO-4 manual

    Looks like I need a new one. mine is 1952. I wonder what the date is on the newest one?
  11. O

    FO-4 manual

    there must be multiple revisions. this is my page on brakes.
  12. O

    FO-4 manual

    I have seen where people have referred to pages as high as 135 and figures up to 195. My F0-4 manual has 39 pages and ends at figure FO97. What am I missing?
  13. O

    Back fires

    Yes, I will. My issues will be when I try getting the 44D running. thanks for the info.
  14. O

    Back fires

    Jim, Are the Belden Premium metallic wires a 2n set? or spool and make your own?
  15. O

    Back fires

    Well, I put these wires on along with new points but, this did not help any. further testing showed low compression on #3 cyl. Oil helped compression a little and the valves are fine. so I was just waiting till I had the time to tear into it when it ate the wires. I'm trying to clean out the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top