Recent content by OrangeInNE

  1. O

    D14 Oil Pan

    Wide front. Thanks
  2. O

    D14 Oil Pan

    Looking to remove the oil pan on my D14. As I look at it it seems it might be possible to get it off without removing the front end but I'm wondering if it would be less aggravation to just pull the front end. Anyone with experience on this? Thanks
  3. O

    D14 PTO oil seal

    Is this normally a difficult seal? Drained the transmission and pulled the rear bearing retainer off will no issues. That seal is proving difficult to remove. Any tips out there? Thanks
  4. O

    80R brackets

    I'm 3 hours away from the farm so I cannot run out and check. The D17 we have is a SeriesIV and the bracket for it is bigger than the bracket for the WD45. That D17 drawbar is a lot bigger than my D14 so I don't think they use the same bracket. Side note- part of the motivation in picking up...
  5. O

    80R brackets

    Seeing what's out there- anyone have the brackets to mount an 80R mower on a D14? Have the mounts for a WD45 and a D17 but would rather use the D14 to mow. Thanks in advance
  6. O

    D14 venturi

    Looks like McDonald Carb has one that will work. Thanks
  7. O

    D14 venturi

    Having trouble finding a venturi for a TSX 670 carb. Any leads on where to find one? Thanks
  8. O

    Copper Pipe Cutter - Not tracking straight

    Those minis, even the good ones will do that. I used to plumb and used Rigid cutters (pretty decent tools). When you use the mini, don't cut in the same direction when you get it started. Work it back and forth (both directions) and watch it when you work the full 360. Once you have the...
  9. O

    Leaking thermostat housing

    Thanks for the tips. Looks like the copper washer stopped the leak.
  10. O

    Leaking thermostat housing

    Have a 47 C that is leaking coolant around one of the two bolts that attaches it to the cylinder head. Any ideas? Thanks
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top