Recent content by PGetman

  1. J

    video snake recommendations

    I've been on Medicare for several years - that means I can't see, get down, get up - or about anything else as well as I used to. I've got the "hots" (that's a 60 year old word) for the tool which is a camera on the end of a flexible cable that displays the image on a screen. Any experience to...
  2. L

    4000 injection pump [irratic Idle?]

    I just sold a nice 4000D thats starts and runs excellent but when idling it sometimes picks up RPMs and if you crack the throttle or footfeet it will go back to around 8/9 hundred where it might stay or it might speed up again.It has the tall pump.I am thinking internal pump ring.I wont deliver...
  3. D

    861 3pt arms

    This is probably a dumb question but I recently bought a "59 861 and I notice the three point arms only go down to about 10 inches above the ground. Is this normal? Can they be lowered? My 8N"s arms go almost all the way to the ground. I"d like them to go lower so my subsoiler will go deeper.
  4. R

    Pump GPM

    Just read the post below, got me to wondering,I also have a Wagner loader with what is probably the original pump. What is the GPM flow through that pump? It leaks and I have a newer pump that I am thinking about replacing it with. Can I go to a higher GPM pump?
  5. W

    900B diesel manit. im neew to them

    how much oil and where do you fill oil for injection pump i just bought one last week also what other things should i know about these big beast to keep in good working order? thanks
  6. P

    Allis WC missing on #1 #2 cylinder (dead or nearly dead

    The problem was that the manifold wasn"t seated on correctly. The orginal studs were applied back on w/out re-chasing the threads. When tightened on the studs appearred tight but it didn"t press the manifold against the engine block as it should. Visually you couldn"t tell. So I took the...
  7. P

    Allis WC missing on #1 #2 cylinder (dead or nearly dead

    Originally, I did switch the wires between these two cylinders and it made no difference. Tested it by grouding the removed spark plug and it snapped consistently so it is correctly firing in it's present condition but theres no explosion inside the cylinder walls. So this indicates that gas...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top