PJH's latest activity

  • P
    PJH replied to the thread Tired. . ..
    I told you wrong - it weighs around 1600 pounds. It's a Goodyear LSW1400/30R46.
  • P
    PJH replied to the thread Tired. . ..
    The tire is real - it weighs around 1100 pounds I am told. It was rolled in beside the H to get it out of the weather. It goes on a huge...
  • P
    PJH reacted to Jim.ME's post in the thread "Air Cannon" equivalent for small tires. with Like Like.
    Takes advanced planning but stick the tube in the tire and blow it up to stretch the tire. Set it in a warm place or the sun for a...
  • P
    PJH posted the thread Tired. . . in Tractor & Farm Talk.
    .
    • 20261001_080245.jpg
  • P
    PJH reacted to 37chief's post in the thread Soldering gland on fuel line with Like Like.
    Regular flux should work, and straight 50 50 solder, Clean is your friend. Don't forget to put the nut on the line. Stan
  • P
    PJH reacted to Mark-Ia's post in the thread What just happened?!?! with Like Like.
    Bad condenser.
  • P
    PJH replied to the thread John Deere B axel lock up.
    I have heard of worn bushing in the brake assembly causing strange things to happen. I would think that it would be more apt to happen...
  • P
    PJH reacted to Stephen Newell's post in the thread Thoughts??? with Like Like.
    Sounds more like inadequate power or a worn breaker.
  • P
    PJH reacted to miangus's post in the thread Thoughts??? with Like Like.
    What is the cutout pressure? I would change the breaker. Well first I would check the current draw. But those compressors often run...
  • P
    PJH reacted to TheBartman47's post in the thread Thoughts??? with Like Like.
    Is it the local circuit breaker on the pump, or the house circuit breaker? In either case, it could be a weak breaker. As others have...
  • P
    PJH replied to the thread John deere 50 clutch noise.
    One of the guys in the neighborhood, a lifetime International guy, bought a JD 70D. He got off of it to open the pole barn doors and...
  • P
    PJH reacted to ET's post in the thread John Deere 50 PTO Clutch slipping with Like Like.
    If you pull the plug and you find heavy gear oil in the pto clutch the seal is bad between the pto housing and transmission. You will...
  • P
    PJH replied to the thread John Deere 50 PTO Clutch slipping.
    There's a lot to discuss about the PTO clutch. I have overhauled a couple and I still would study the service manual before I did any...
  • P
    PJH replied to the thread Replacing steering shaft bushing.
    Sorry Matt - we were typing at the same time.
  • P
    PJH replied to the thread Replacing steering shaft bushing.
    I haven't worked on one that old. The newer ones are surely somewhat similar. Remove the steering wheel. Remove the end cap from the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top