(800) 853-2651
SHOP NOW

Recent content by Plant Doc

Yesterday's Tractor Forums
  1. P

    2355 Steering

    Thank You. Hopefully Monday or Tuesday.
  2. P

    2355 Steering

    All filters and hydraulic oil changed two weeks ago. Used John Deere Hydraulic Oil to refill.
  3. P

    2355 Steering

    2355 -- e\\ Every time I stop and restart tractor I have to wait several minutes before the steering will work and sometime I work the steering wheel left to right to get it to steer?? where do I start to fix this problem? Thank You.
  4. P

    Truck Farm

    I was taught that the word Truck Farm came from the French word Troquer meaning to Barter. It supposedly started back in the middle 1800s.
  5. P

    John Deere 2355 hydraulics

    Thank you everyone for your replies. I will cap the lines Monday morning. If it doesn't work I will get back to you. Thanks again
  6. P

    John Deere 2355 hydraulics

    I have a friend's JD 2355 in my shop because the pto ran continuously. We split tractor at trans and replaces the pto clutch pac. The owner said as long as we have the tractor in the shop we should look at the hydraulics as they seemed very weak. This is a second hand tractor that I assume...
  7. P

    2355 pto will not disengage

    Open station 2355, pto will not disengage. This tractor has the pto lever on the left side of the dash and it activates a hydraulic control that engages and disengage the pto. Don't know where to start looking for this problem? Tractor has a lot of hrs on it, but not many pto working hrs. I...
  8. P

    Dieseltech 135 followup

    About a week ago I had a post about a 135 hydraulic problem. Dieseltech responded and said that the auxiliary valve lever had to be in the rear position for the 3pt to operate. I tried it and still no 3pt. But I could hear a change in the engine when I operated the valve lever. So I removed...
  9. P

    Massey 135 late model

    Thanks Dieseltech: Now that you told me about the Auxiliary valve, I think there may be a problem with this valve. The lever doesn't feel right. It acts like the spool is too loose in the bore. I think I will eliminate it and see what happens. Thanks again.
  10. P

    Massey 135 late model

    This is a gas 4 cylinder Continental. The tractor has not been run in maybe 4 yrs. I have it running but there are no hydraulics. There is no 3pt response. I have moved both hydraulic levers up down several times and nothing. It does not even try to lift. The oil level is on full before...
  11. P

    Finally a chance to test the pto

    SV: Regarding the fuel leak around pump, I had the same problem. I tried a variety of different washers with not luck. After many four letter words I removed the line that was leaking and found the bango fitting had a hairline crack in it. I had to use a magnifier to see the crack, but it was...
  12. P

    John Deere 2755 fuses

    Jim: Thank you, that is exactly what I needed and it looks the same as the 2755 I am working on. Thanks again.
  13. P

    John Deere 2755 fuses

    I am working on neighbor's 2755 open station. It has had electrical light problems which are fixed. But on the fuse panel, fuse number 16 keeps blowing as soon as a fuse is put in. I don't know what this fuse does and can't see anything not working except for Tach and hour meter. It is a 10...
  14. P

    gear pulling struggle

    I know nothing about a Huber but I have had several Waukeshas apart and I think taking those gears off as you are is almost impossible. If you look at the two big gears they have three hole on them, generally if you turn the gears and look through the gear holes you will see a bearing...
  15. P

    2950 Hydraulic clutch follow up

    I finally got it to work after 4 more hours of frustration. After working on it for 2 hours I decided to pull the slave cylinder off and bleed it on the work bench. It worked!! The clutch works better now than it has in several yrs. Thanks to those that responded on my previous post.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top