Recent content by PLZ1000

  1. P

    What was the first car/pickup you drove as a kid

    1964 GMC stepside... We called it Booger Red
  2. P

    Ford3000_HolleyToZenith

    I just installed a Zenith on my 1966 3000 and it runs great. It was a direct replacement. I got it from Farmer equipment. His number is 330-482-4180. He is extremely helpful and knowledgeable about these carbs. Hope this helps.It may help to have your serial number handy when you call him.
  3. P

    3000 clutch problems

    The tractor would stay in gear and not stop when the clutch was pressed. I worked with this afternoon and it is working great now. Sorry for not making myself clear.Thanks for the responses. Philip
  4. P

    Generator

    Thanks for the info... I'll try this tomorrow and let you know. PS. It is not a new genny but has been sitting for a year maybe longer.
  5. P

    Generator

    My 3000 tractor has been sitting for a year and the generator is not working. Will flashing the field get it working again if the generator is still good? If so what the correct procedure? Thanks
  6. P

    3000 clutch problems

    First thanks to UltradogMN, Tree man and 3000OH for your help when I posted 3000 Running Rough. A combination of plugs, points and coil fixed the problem. I ran it about 30 minutes before it started raining. Now another problem cropped up. My clutch won’t engage. Whatever gear it is in it stays...
  7. P

    3000 running rough

    Thanks for the help. I’ll try these this week as time permits. As for the electric pump, I hooked it up just to double check my fuel flow. It won’t be installed permanently. I’ll keep you posted on the progress.
  8. P

    3000 running rough

    Thanks for the reply. I hooked an electric fuel pump just before the carburetor and still got the same results. Now it is spitting and sputtering almost from the start. I took the #2 plug out and checked for a spark. It was very weak and inconsistent. The distributor was replaced a couple of...
  9. P

    3000 running rough

    I have a 1966 Ford 3000. I am having trouble keeping it running. It starts when cool and will run great for about 2 minutes, then starts to spit and sputter and eventually dies. If I let cool off for a few minutes it will start but runs very rough and dies. I put a new Zenith carburetor but it...
  10. P

    Ford 3000 serial number

    Thanks for the reply and information. It was a great help. Philip
  11. P

    Ford 3000 serial number

    I have a Ford 3000. I can"t seem to find an explanation for my SN. Here’s what I have. 31022A C146172 6H8 Can anyone help? Thanks, Philip
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top