Recent content by Purryburry

  1. P

    Hydraulics issue tea20

    No he told me himself. I thought it strange but he is adamant that putting the tractor onto gear is the only way to get the hydraulics to work.
  2. P

    Hydraulics issue tea20

    Would there be any reason why you would need to engage the tractor into gear to have the hydraulics work? The pto is in gear but the hydraulics only work when the tractor is in gear and moving. It"s a mates tractor and my tea20 does not have to be in gear for he hydraulics to work.
  3. P

    Flooding

    Problem is rustyfarmall there actually is no arm to bend. The float is not attached to anything. It truly just floats on it"s own and is not connected in any way to the body of the carby. The only way that I can see to adjust the level is to put washers under the needle and seat to bring it...
  4. P

    Flooding

    Richardnwo my mates carby is the same. We had a look at it today to see if we could adjust it The way geoffm suggested. The only way that I can think of adjusting the thing is to put thicker washer under the needle and seat to bring it down closer to the float which as you say just sits in a...
  5. P

    Flooding

    My mate has a tea20 which continues to flood. He has replaced the needle and seat and the float has no holes. It is a zenith carby. Does anyone have any suggestions as to what may be the cause and what he might try to stop it?
  6. P

    Tea20 parts in Australia?

    Great stuff Bendee thanks. Email me at [email protected] if you like. Mal
  7. P

    Tea20 parts in Australia?

    Coonabarabran NSW Michael
  8. P

    Tea20 parts in Australia?

    Can any members in Australia tell me where the best place is to get parts for a ferguson tea20? I am looking to replace the bearings in the distributor but have had no luck finding the parts. Mal
  9. P

    What year model?

    Great info thanks Bob. Have friends in Roma who come from down here (Coonabarabran). His name is Carl Chambers and he has a mobile diesel repair business. Will take your advice and make sure I get the rubber gear boot.
  10. P

    What year model?

    Thanks Bob. Being Aussie (same here) can you tell me how much transmission oil in liters to use?
  11. P

    What year model?

    I have a ferguson tea20 and on the chassis near the transmission dipstick are the numbers 152 then a space and the number 1. Directly underneath all those numbers is another 1 on it's own. I believe that these numbers may tell me the date my tractor was built. Can anyone advise? Many thanks. Mal
  12. P

    Tea20 ferguson year of manufacture

    I have a tea20 ferguson tractor. On the body near the transmission dip stick is the numbers 152 and a space then the number 1. Under those numbers is another 1. Just trying to work out the date of manufacture if anyone can help? Mal
  13. P

    Gift TEA 20

    Jeff I notice you say not to use hydraulic oil. Is gear oil the same or is it ok to use. Mal
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top