Recent content by Ranger505

  1. R

    1954 U.S Army air compressor info

    😂😂
  2. R

    1954 U.S Army air compressor info

    Going to try and clean it up this afternoon
  3. R

    1954 U.S Army air compressor info

    Thank you guys that helped a lot going to try and get it working properly. It started up after a few headaches my goal is to get the air plumbing so it don’t leak
  4. R

    1954 U.S Army air compressor info

    Looking for info on this old compressor that I purchased looking for info on what kind of motor it is I can’t seem to find anything on the Internet. Any info would be great. looking to try and restore to the factory color.
  5. R

    Case 1818 skid steer need help

    I do have the case manual and it tells me how to adjust everything. It’s just hard for me to read something and comprehend to what it says. My dad used to be able to do all that but he has no longer with us unfortunately
  6. R

    Case 1818 skid steer need help

    I will use this one for a little while and then I will change all three of the belts. I am getting a creep on the wheels on the right side and I’m going to try and fix that neutral lever as well. It worked before I took it to that shop that replaced the belts a while back Now I don’t but those...
  7. R

    Case 1818 skid steer need help

    It may not be the correct size I cross reference the part number from case to Napa. I will buy one from case the one that was on there had teeth. This one has no teeth. I don’t know if that matters.
  8. R

    Case 1818 skid steer need help

    Thanks for your help.stay in touch
  9. R

    Case 1818 skid steer need help

    I used the machine on Friday and when I had a load, I kept hearing squealing so I put a ratchet strap around the pump loosen the bolts and tighten that belt very tight and it seem to work after that. so I think I found the problem that belt just needed to be super tight I guess. I thought the...
  10. R

    Case 1818 skid steer need help

    Not sure, the belt was a little loose I tightened it up still very sluggish. Without a load in the bucket, it works fine maybe a little bit lazy. On Friday I’m going to try and use it. My neighbor wants me to grade some dirt. We’ll see how that goes.
  11. R

    Case 1818 skid steer need help

    I’m assuming the pressure psi is ok. When I was holding the pressure to see it on the gauge the pump squeals then when I release the pressure it stops squealing I tried to upload a video, but it wouldn’t let me
  12. R

    Case 1818 skid steer need help

    It was on the down pressure. I guess my mistake but there is a reading now (see picture)
  13. R

    Case 1818 skid steer need help

    I got the gauge in today I plumbed it into the hydraulic cylinder powered up the skidder and no rating from the gauge at all I put it in full throttle lifted the bucket up down, tilted the bucket no rating on the gauge I would assume there’s pressure because it is moving the bucket
  14. R

    Case 1818 skid steer need help

    I looked at the belts they are all tight and look ok, I ordered a hydraulic gauge from Amazon hopefully I get it by this weekend and I will check the pressure on the hydraulic lines I hope I can figure this out. It’s been sitting for about seven months. Again, I appreciate all your feedback and...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top