Red Rex's latest activity

R

Red Rex reacted to Bern's post in the thread Lift arm travel with Like.

What? The lowest position is established when the piston bottoms out in the cylinder.

Wednesday at 1:29 PM
R

Red Rex reacted to showcrop's post in the thread Lift arm travel with Like.

I would start by replacing the pins. You will probably raise it by 1/4 inch.

Wednesday at 1:28 PM
R

Red Rex reacted to shaun wallace's post in the thread Lift arm travel with Like.

That is a MF style leveling box and is on wrong side. Should be on right side. Badly worn cam follower pin will let arms go lower than...

Wednesday at 1:28 PM
R

Red Rex reacted to Sean in PA's post in the thread Lift arm travel with Like.

Some pictures taken from a little farther away might be helpful as well. The leveling box might not be the proper one for that tractor...

Wednesday at 1:28 PM
R

Red Rex replied to the thread Lift arm travel.

I know it should be on the right but the clearance is the same on both sides. Don’t know about the cm follower pin. Something to check...

Wednesday at 1:28 PM
R
Red Rex replied to the thread Lift arm travel.
Wednesday at 1:25 PM
R

Red Rex replied to the thread Lift arm travel.

1968 Ford 4000 3 cylinder diesel

Tuesday at 4:15 PM
R
Red Rex posted the thread Lift arm travel in Ford.

The lift arm leveler is starting to worry a hole in the case. Any ideas on how to adjust the distance the upper lift arms travel? They...
Tuesday at 1:44 PM

Members

Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy