(800) 853-2651
SHOP NOW

Recent content by reuer

Yesterday's Tractor Forums
  1. R

    Powerquad Forward Cluch Problem

    Not sure how similar the transmissions are but when we lost forward gears on our 7510 with lh reverser several years ago it ended up being some broken springs. I dont recall the name of the valve but it had 3 springs under a cap held in with a snap ring on the bottom shift valve. Our springs...
  2. R

    Oliver 66 RC Battery Tray

    Hello, I'm working on replacing the battery tray on our 66 with a Korves replacement. I got the old rusted out tray removed and the replacement one seems to be about a 1/4" narrower than the opening. Not sure if the console is stretched wider or if I'm just not looking at the tray right. The...
  3. R

    John Deere 7600 Hydraulic pump replacement

    Does anyone have experience with diagnosing the 7000 series tractors hydraulic pumps? Functions are slow and pump whines when using hydraulics. Ran some oil out of filter test port between charge and main pumps into a pail and seems to have small amount of froth to it. This tractor does have...
  4. R

    4055 Steering motor repairs

    Thank you Tim. I sent you an email. Adam
  5. R

    4055 Steering motor repairs

    Thanks Tim. Hitting the arm with the hammer worked great! The shaft seal started leaking last winter feeding cattle when it was so cold. Could that have helped to cause this or is it just time for a rebuild with 12,000 hrs on the tractor? Can it be done with removing one frame rail or do I...
  6. R

    4055 Steering motor repairs

    I am working on our 4055 w/ mfwd and am having some difficulty removing the steering arm from the pinion shaft to replace the seal. Just wondering if I am missing something or if it could just be stuck that bad. I dropped the axle out and with arm bolt removed have tried several pullers and...
  7. R

    4055 compression test

    I'm going to be putting injectors in my 4055 and would like to run a compression test while I have them out. I am finding mixed results of what compression adapter I will need. Does anyone have a picture or a part number for one? thanks
  8. R

    Overheating hydralic oil JD 7810

    Dealer should be able to run a diagnostic pressure test. Should show if there is a high pressure leak in the transmission. By far cheaper than them throwing parts at it.
  9. R

    4650 / 466 Troubles

    Just had this happen last fall on our 4455. Same story, blow by with coolant drops and nothing out of cleaned out weep hole. Drained the oil and had small amount of coolant in it. Pulled the oil pan and pressure tested the radiator to find a slow leak from waterpump. Glad I pulled the pan as...
  10. R

    John Deere 2840 Steering Repair

    Thanks for the responses guys. I agree on all new seals/o-rings. B&D oil baths of that kind are never a good time! TxJim our 2840 was used hard with a loader by previous owner., so probably is a ticking time bomb now. When dad and grandpa bought it in the late 90's it was replacing a...
  11. R

    John Deere 2840 Steering Repair

    I am working on the power steering on our 2840. I'm looking for a little advise from the other poor individuals that have had to deal with these lemon tractors. So the unit gets much hotter than other hyd components which points to internal leakage along with a hesitation or click of sorts...
  12. R

    4055 SCV Block-off Plate

    Thanks B&D and Jim. Looks like I will get myself a cover and more then likely get ahold of tims, have read a lot of good things about his rebuilds. Adam
  13. R

    4055 SCV Block-off Plate

    Ok so I have a 4055 that needs all 3 scv's rebuilt and would rather not have it setting in the shop for several days beings it's on our mixing wagon. Haven't had very good luck at the local dealer with reman scvs so I am wondering if a (R41446 Selective Control Valve Cover) would allow me to...
  14. R

    7x00 Series Question

    I dont have any experience with the 19 speed powershifts in those but have heard they can be spendy to rebuild. Also don't know anything about 7500's, might be a European model maybe? Anyways we have a 7600 mfwd powerquad that dad bought new with a loader. Hour meter shows 17,750 hours...
  15. R

    John Deere 50/3700 side mount mower parts

    I recently aquired a 67 3020 and a 3700 side mower at an auction. The previous owner modified the mower to fit the tractor but I would like to do it right or as close as i can. Basically what I need to find is the longer jack shaft and the spacer between the pulleys on that shaft from a 50...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top