Recent content by Rex Simpkins

  1. R

    Cub 154 engine swap project

    Very interesting, we had a 154 lo-boy bought new, it really was the most comfortable mower to drive and sit on and did a great job of mowing (if you never let the grass get any higher that a golf cousre putting green). I always thought IH had a great idea and that if they could have used a 140...
  2. R

    IH 200 Manure Spreader

    try 612872R1 or 5291SA they both are still available
  3. R

    Hologen light bulb question

    Why not replace them with LED's one at a time as the halogens go bad, that way you get all your moneys worth out of old ones and a little money out at a time.
  4. R

    Farmall 300 pertronix ignition

    Old I agree with you 99.9 percent of the time and I also serve in sumbmarines 631 Gold from 1978 to 1981 I did not say that sediment bowls were not good for filtering obviously they are, but the big plus about sediment bowls is water separating ability. However the sediment bowls used on U.S...
  5. R

    Temp on Super H

    Every H or M or Super I have ever had I needed to work the clear living snot out of it on a hot day to get it to the first leg of the R in RUN
  6. R

    Farmall 300 pertronix ignition

    Nothing wrong with petronix when installed correctly, I have never understood why anyone would leave a ballast resistor inline when changing to 12 volt (other than not wanting to buy a new coil) get rid of as much unnecessary stuff as I can. I converted my 240 over more than 20 years ago and...
  7. R

    Is Ground Strap Safe Since it s Exposed Bare?

    If you want the correct cable try 350736R91 It mades a nice neat set up
  8. R

    Spark plugs for a 230 farmall

    Yep Autolite 3116 or NGK AB6
  9. R

    farmall 140 radiator with 404 engine

    If used a 404 engine in a C (i.e with no water pump) then the holes in the cylinder head gasket are too small to allow good circulation in a thermosiphon tractor. (i.e. head gaskets are differant in water pump versus non water pump tractors.
  10. R

    stuck pistons

    Its worth a shot and you have been given good advise, how ever after all these years of fooling with stuck tractor engines I have only had 1 come loose on its own by soaking. Now it just seems alot easier to go ahead and pop the head and take a look.
  11. R

    drain plug

    I doubt you can buy a tractor in decent shape for $29.00
  12. R

    What does it go on

    375560R91 sure looks like a Zenith to me. Should fit most C113/C123/135
  13. R

    Rock auto

    I have used them and highly recommend the site
  14. R

    cub wheel removal and install

    What ever you do remember to place wedges on your front axle
  15. R

    International 504 Hi-Clear

    Might be easier to remove pto and get it out thru that hole in the casting
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top