Recent content by rick gootee

  1. R

    new idea 506 loader

    I got a 506 new idea trip bucket loader with the low pressure single acting cylinder and wanted to know if any one knows where to order the v-ring packing for the cylinder for was told they didn't leak but want to replace the packing in them to make sure before I use it . the manual said part...
  2. R

    allis chalmers d14 loader

    ok thanks I have a loader the guy said was off a d17 and it does not have a bucket and I found a loader from a d14 but the d17 loader frame is 5" wider then the d14 and didn't know if would fit with the d14 frame .
  3. R

    allis chalmers d14 loader

    will a d14 loader fit on a allis chalmers d17 it has a trip bucket . don't know if it the same width to fit .
  4. R

    belt for 356 sickle mower

    looking for a part number or belt size for a 356 oliver sickle mower
  5. R

    8n 3 point lift won't work right

    i have been looking for any leaks on the lift and when i drop the lift it leaks from the exhaust valve only on the way down and i don't know where to look for the check valve as the #2 place to look for leaks . have unit all the way out and it does leak on the way out of the piston ram on...
  6. R

    8n 3 point lift won't work right

    i have rebuilt the pump put new saftey valve and on the top end have put piston and rings and gaskets and still i can not control the lift it also will not stay up when out of gear what needs to be done or get a new pump ? thanks rick
  7. R

    three point lift

    its a 8n all i did was rebuild the pump what do i need to do ? thanks
  8. R

    three point lift

    i have a 8n and just rebuilt the lift pump and it still will not work right . you can not control it to stay in one spot it will go all the way up or all the way down but will not stay where i wnat it to . its all clean inside and all new parts in it . whats wrong is the pump wore out or do...
  9. R

    over ride for a 8n

    thanks for the help that was easy to do just had to ask how to do it the right way
  10. R

    over ride for a 8n

    bought a pto over ride for my 8n was told it will work like a live pto . how do you put it on look at it nd don"t know how i iwll be able to put the snap ring on after it is in place with the pto cover i have any one tell me how to hook it up thanks rick
  11. R

    front seal of trans missoin on a 8n

    my 8n is leaking fluid from the front of the tranmission i think it must be the front seal on the transmission is leaking do i have to tear the hole trans a part to fix this or can i just put the front seal in or what do i do . thanks
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top