Recent content by Robert Barr

  1. R

    ford 800 oil pump

    the gauge seems to be about 3 to 4 years old, it returns to zero after shutoff, I was talking to a new holland mechanic and he said that he thinks that this 100 psi g-rotor pump is for the industrial engine and that I have a AG engine and are probably the one in the same, he said to run 5w30 and...
  2. R

    model 800 oil pump

    Thanks John, I have 10w40 in it now, will use 5w30 on next change. i saw were the bypass spring is located, I took the capscrew off in hopes to inspect but there is a smooth pressed in cap or seal covering the access to the spring, can i remove and reuse this cap?
  3. R

    model 800 oil pump

    I purchased a 1957 model 800, 172 ci, I noticed that the oil pressure was high, i dropped the pan and discovered that a 100 psi oil pump had been installed, should i change this back to a gear type or is this pump ok?, It has above 80psi at cold start-up and 60 to 70 after warm up. no oil...
  4. R

    ford 800 oil pump

    I purchased a 1957 model 800, 172 ci, I noticed that the oil pressure was high, i dropped the pan and discovered that a 100 psi oil pump had been installed, should i change this back to a gear type or is this pump ok?, It has above 80psi at cold start-up and 60 to 70 after warm up. no oil...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top