Recent content by Robert Ga.

  1. R

    MF35 injector pump governor spring position

    Thank you for sharing that information. I'll try that setting.
  2. R

    MF35 injector pump governor spring position

    The DPA number and the serial number are the only numbers on the tag. any idea where I can obtain a spec sheet for this pump?
  3. R

    MF35 injector pump governor spring position

    I am trying to determine the correct throttle spring position on the fuel injection pump on a 1962 MF35. I have the chart, but the numbers on the pump do not match up - no slash ("/") on the pump as indicated on the chart. Numbers on the pump: No. DPA: 3232718 Serial No.: R7324ND
  4. R

    2N carb float

    Thanks, I'll try that.
  5. R

    2N carb float

    It didn't have any gas inside of it when I took it out. What is the best way to check for a hole?
  6. R

    2N carb float

    I have a 46 2N that starts and runs good most of the time. Actually if it makes more than two revolutions without starting, I know something is wrong. Yesterday the float in the carburetor stuck and it started flooding. I took it apart, cleaned everything up and reassembled it(three times).For...
  7. R

    Old gas, lesson learned

    Had about five gallons of old gasoline I removed from a pontoon boat fuel tank. I tried to think of ways to get rid of the oil/gas mixture and finally decided to pour it in the gas tank of the 2N along with five gallons of fresh gas. Problem solved, right? Not hardly. Since then I have rebuilt...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top