Recent content by RockinB

  1. R

    Korves 1550 manifold

    Got one from Steiner Tractor Parts years back.
  2. R

    550 Lighting

    If I recall correctly the original rear white light (Headlight type) has a separate small red bulb inside the housing that is operated by small switch on the light housing. I know I have one for my 550, but never installed it. They are hard to find.
  3. R

    3 point top link/post hole digger

    Tim Smith in Canton, Ohio has them. I got one from him years back. He advertises in the Oliver magazines. Oliver Heritage or the HPOCA Magazine.
  4. R

    super55 pto tool help

    I tried to locate one when I did the same on a 550. Tried Mack, Snapon and others with no luck. Wound up borrowing one from a dealer. 160 mile round trip getting it and returning it. That was about 9 years ago when gas was cheaper. Might be more cost efficient to see if a local machine shop...
  5. R

    Super 55 breather vent elements

    Looks like these could be made from a Scotch Brite pad. Worth a try.
  6. R

    Zenith Carb to Replace Marvel Schebler

    Anyone out there replaced a Marvel Schebler with a Zenith. I have an Oliver 1550 gas that I rebuilt the Marvel Schebler TSX903 carb a few years back and recall having a heck of a time to find the "sweet spot" in the high speed adjustment, but eventually succeeding. Well recently upon completing...
  7. R

    Cylinder Sleeve Puller

    I've decided to incorporate your flex handle and two flat spot idea into my home built puller as the combination of both is a great idea. Ihave found a sacrificial 3/4" flex handle which I think will suffice, some 3/4' coarse thread Allthread, and a piece of 5" C chanel with 1&1/2" legs for the...
  8. R

    Cylinder Sleeve Puller

    Thanks; The plates and threaded rod is what I had in mind. Your idea of the flat spots and swivel bring it up to professional grade. What difference would fine thread as opposed to coarse have; just a more gradual pull? Thanks again.
  9. R

    Cylinder Sleeve Puller

    I"m in the process of replacing sleeves in a 1550 gas. Not having any luck borrowing one, and the price of a new one is darn near twice the price of the sleeve kit. I"m considering improvising one, and wonder if any of you have done the same,while working under the shade of a tree as I am. Any...
  10. R

    Oliver 550 PTO disks broken

    To bad someone jinxed it with the John Deere color scheme.LOL
  11. R

    fenders for 1650

    I think the 1550 and 1650 are the same. I ran into that at one time. Bought a pair of near mint ones at an auction only to find they were way to big for my 1550. If I remember correctly the ones that fit measure 29 or 30 inches top to bottom. the big ones are 34 top to bottom.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top