(800) 853-2651
SHOP NOW

Recent content by rockmike

Yesterday's Tractor Forums
  1. R

    Davis FEL on TO30,front mounting?

    So thats the deal guys? the loader just uses those two bolts under there and a 35 would have 4 bolts holding the front of the loader? y'all have seen these mounted like this? I wish I could find my camera lol I would post y'all a pic or two,I will look again tonight.... Sure appreciate...
  2. R

    Davis FEL on TO30,front mounting?

    Yeah the box is pretty hammered alot of play in the box output arms,lots of play in the tie rods also.I couldnt agree more,especially since the tractor will be tough to work on once the FEL is mounted.So that is my plan:get the FEL mounted the best I can,remove FEL,clean, paint,build new hydro...
  3. R

    Davis FEL on TO30,front mounting?

    Hey guys and gals I have a 49 TO 20 or 30 not real sure which one I have.I picked up a davis model 101A FEL for it.It came with rear brackets that bolt in useing the rear fender mounts on the rear axle.This is strait forward and done! What hooks up to the front of the tractor? I got this bar...
  4. R

    crank pulley compatable?

    Looking at more pics and such im fairly confident that the 8n pulley is NOT compatible.The fergy pully has a step in it and the ford one doesn't, pretty sure the W/P pully would not line up. Sure appreciate y'all brain stormin this with me.Thanks!
  5. R

    crank pulley compatable?

    IM sure im just getting urine on my boots over this,I'll probably just buy the $100.00 pully cause we know it fits!So I can move forward on my FEL project. Still would be great to know this compatibility issue...im currious. Thanks!
  6. R

    crank pulley compatable?

    yes sir I am,I have found that.The ABC 1812 pump adapter will fit this pulley.I have found a 8 n crank pulley for about $80.00 and it says the ABC 1812 will fit it also. So my question is will this 8 n pulley fit the TO 20 crank shaft while still keeping the alighnment with the W/P etc...
  7. R

    crank pulley compatable?

    HI guys,gals I have a TO 20 or 30 its the continental gas engine.Im trying to hookup a front hydraulic pump to the crank pulley.I removed my pulley and found I got a crack in it along the keyway,plus no holes to mount a coupler for the pump etc.So I need to find a new front crank pulley with...
  8. R

    invented my own implement

    Aaah yes,good idea.But then I would just have to take it to the next level and make the fergy remote control to move me place to place...Shame it don't have a hydro stat lol that would make it easy to remote the tractor!
  9. R

    invented my own implement

    Scaffold was the first thing that popped into my mind when I realized it would reach that high :D Like I mentioned I welded a headache rack and anchor points in.Now im thinking maybe some stake pockets and make some side rails for it maybe one with a flip up shelf to set tools on and a drink...
  10. R

    invented my own implement

    Absolutely,this was right after I built it and wanted to test it!I has a headache rack on it now with anchor points on each corner for strapping things down while in route. And thanks! glad you like it.
  11. R

    invented my own implement

    25 years of bricklaying has left me with a bad back,im always hurtin myself around the place lifting heavy stuff.For the sake of saving whats left of it I went on the hunt for a compact tractor with a bucket...(I have a 48 fergy with a forklift for the 3 point but it lifts in an arching motion...
  12. R

    Upper hydraulic piston for TO20

    I appreciate the reply. It measures the same,just the o-ring in the middle of the piston on the new one instead of the original having the 3 metal rings on its piston,similar to what you would find on an engines piston and ring set up. I was just hoping for some confirmation on this.Cause...
  13. R

    Upper hydraulic piston for TO20

    Howdy,I have a 49 TO20 that im rebuilding.I have a new 2 1/2" upper cylinder that matched my old scared unit.A guy gave me a new piston out of a 8n.This piston has the o-ring in it instead of the 3 piston rings like my old one...will this o-ring style piston work in my fergie hydraulic upper...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top