(800) 853-2651
SHOP NOW

Recent content by roney7

Yesterday's Tractor Forums
  1. R

    cutting edge bolts

    What grade bolts or standard on the cutting edge of a Case 450B dozer, I am needing to replace the cutting edge on mine, and am looking to purchase the bolts seperate from the edge.Case wants a war pension for theirs.
  2. R

    Case 450b radaitor

    Finaly got the radaitor back in my dozer . Its been down since Nov.Good to use it again, pushed up some stumps and left a mess for my son to clean up.
  3. R

    Case 450 dozer TQ problems

    I had the same problem with mine. I found a hair line crack in it. If you have it out you can test it with air pressure. I filled the outer houseing with water put about 25 lbs of air to it and found the crack. Plug all the oil ports and install a quick disconnect to one for air. Be careful...
  4. R

    Case 450 loader

    The only experience I have had is that I pulled mine 4 times and repalced it five times but I have a Case 450B it might be different than a 450 You might drill a hole in the seal and screw in a sheet metal screw and use a slid hammer and pull it out might take two holes one on each side. Cave it...
  5. R

    radaitor case 450b

    The radaitor shop wanted $580 something dollars to recore this one.
  6. R

    radaitor case 450b

    Those are my thoughts also on a used one, unless some gave me one
  7. R

    radaitor case 450b

    The radaitor for my Case 450b is shot I took it to a radaitor shop to get it repaired but was nonrepairable . I will have to get another . I could have this one recored but it the wrong time of year to spend that type of money on my toy. If I made a living with it it would be another story.. May...
  8. R

    case 450B

    I am still working on my Case 450B dozer. I have the radaitor in the shop at this time. Next I will need to work on the c frame, it need cutting edges for it and pins to tighten it up. I thought about buying a lathe to make the pins and other thins but don"t if this would be cost effective. My...
  9. R

    case 450 torque converter

    I have finally got the torque converter in my Case 450B going . I have pulled it 4 times and installed it 5 times . If I stay 1 install ahead I am gaining ground. The last time it was leaking around the bolt holding the Flex plate on. The transmission pressure on the Gage is not as high as I...
  10. R

    need torque converter

    I have a Case 450B that I needs a torque converter or preferable the housing rotating part# D52481. The torque converter is a flex plate modle, Twin-Disc. Does anyone out there have one for sale.
  11. R

    crack in torque converter

    Found a hair line crack in part #D52481 housing -roating for my Case 450B, Explains why it kept leaking after I re3placed the O-Rings in it. I will be looking for this part. Don,t know why I kept over looking it .Eyes are not what they use to be.
  12. R

    test

    Looks like I made have had the O-Ring side ways . I rolled it this afternoon and will test it again tomorrow. If I could put it back together correctly as easily as I take it apart I would be doing OK.
  13. R

    test

    I put air pressure to the Case 450B torque converter and got air bubbles comeing out Looks like I will need a new o Ring This was a new one I put in but it still leaks . It was the large O-ring on the inpeller . This was eaiser that reinstalling the torque converter and the pulling it back out...
  14. R

    test plan

    My plan to test the torque converter on a Case 450B is to cap off the ports and put air pressure to it.I beleive about 25 lbs will do . These things are too hard to install to test and then pull it back out if it leaks . I will do air and then fluid. Has anyone else ever tried this before, if...
  15. R

    messed up seal

    I should have put in that this is a Case 450B twin-disc torque converter flex plate type Here is where I messed up the seal puting it back together One of these days I might get posting pictures right
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top