Recent content by SCOTTRS

  1. S

    John deere 2640 clutch and problems

    The splines on the input shaft are all fine. I was wondering if the pto shaft which is right behind the clutch shaft and goes through the splined hub of the pressure plate could be contacting the back of the clutch plate which would keep it forward enough to still be in contact with the flywheel...
  2. S

    John deere 2640 clutch and problems

    I did that search and the dimension given from clutch lever to flywheel face for the 2010 would be impossible on the 2640 PP. Although from the machined side of the PP to the levers using the dimensions given for the 2010 would get close to where the pressure plate was set when purchased which...
  3. S

    John deere 2640 clutch and problems

    TX JIM, Your second picture does show the snubber brake plug as key 25. Your first diagram I don't have in my book but it looks like that washer would be on a shaft in the transmission case. I am going to put this tractor back together today. Would you know what the dimension is from the...
  4. S

    John deere 2640 clutch and problems

    I did see that in my shop manual as a possible problem. Would the snubber brake be a, it works or it dosent work situation? I am asking because when I first put the clutch in it worked fine for 15 minutes of testing. Then I couldn't get it in gear at all with the clutch depressed. I spent the...
  5. S

    John deere 2640 clutch and problems

    I would like to ask if anyone has the dimensions of the jd 229 Clutch alignment tool or would know a measurement from a pressure plate lever to ...? I am trying adjust the pressure plate and JD doesn't have the tool. I have been having problems with this tractor being unable to engage the...
  6. S

    International 2000 loader

    Casey in SD, Thanks for the reply and great info. I never considered a machine shop because I thought it would be 250.00 to walk in the door. I am stuck right now not being able to get the cylinder nut off. Not having ever rebuilt a lift cylinder I figured it would take 3 hours. I have twice...
  7. S

    International 2000 loader

    I purchased a International 2000 loader to put on my 656 and I have a question. One of the dump cylinders is leaking pretty bad so I went to Case/IH to get the rebuild kit (Wow what a price).My question is how do you get the retaining ring out. Apparently the previous owner turned the nut and...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top