(800) 853-2651
SHOP NOW

Recent content by simonsjazznhotrods

Yesterday's Tractor Forums
  1. S

    HotRod

  2. S

    HotRod

    Hey there Wore Out Thnx for the response Good Sunday to You, BTW the advice you gave me for the oil pump Prime worked perfec, this tractor is sure testing my patience Ive worked on them before but not to the extent of this one completely knowing nothing about the history of it which I’m sure is...
  3. S

    HotRod

    Thnx Jim Like I said it’s a New 12v coil/distributor unit but I have not opened it up to check everything because it was all assembled which I realize it doesn’t mean everything is right but had exactly the same results after basically rebuilding the old unit but it was old and worn, weights...
  4. S

    HotRod

    Hey Thnx for the reply cdmn i have not put 12v to the top of coil it has a resistor, it has a new 12v battery, starter, new switch Ive tested everything to the input of the resistor it’s 12v coming out of resistor is 9v New wire to top of coil it test 9v Complete new coil/distribution system...
  5. S

    If You have a 12v system with 12v distributor and coil Do you even need a resistor

    If You have a 12v system with 12v distributor and coil Do you even need a resistor
  6. S

    HotRod

  7. S

    HotRod

    Correction on top of coil is 9.?? volts But not to 10
  8. S

    HotRod

    I Have No history on the Tractor at all A person gave it to my neighbors and moved out of the country, my neighbors have no history at all on tractor. We have no way of finding the owners so I have been just been taking everything step by step. The Tractor was not running and hasn’t for sometime...
  9. S

    HotRod

    Basically having same problem as Dale 6-5-21 helped by Bruce (VA) 8n Front mounted distributor but the one I’m working is 12v no spark
  10. S

    HotRod

    Oh another question would you use the 80-90w oil that some of the others recommend or just use the same oil that is in the engine and how much should I put in the oil gallery as you call it then I guess I put the plug back in as came out, then should I hit the starter immediately without the key...
  11. S

    HotRod

    Hey Wore Out Thank You So Much I went out and finally found it, it was under the line that went from governor to oil filter and with old oil and dirt mixed had covered it up basically I spent bunch of time cleaning around it and loosened it but decided to wait till tomorrow and daylight to take...
  12. S

    HotRod

    Ok Thnx Very Much I will go look right now I thought I looked everywhere on front of the engine but hope I didn’t because I sure would like to find that plug
  13. S

    HotRod

    I’m working on an 8n Ford the oil pump lost its prime I saw on here where it said to remove the 15/16 nut off front of Block and squirt 90w oil in there but when I went out there just now that must have been instructions for a different year model or something because there was no such nut on...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top