Recent content by Sinned133

  1. S

    mf 50c instant reverse linkage

    all apart found bad plate reverse clutch I'm kind of worried about all the needle bearings and putting them back together it seems there is a ring attached to the reverse set of gears to another ring does that seem right
  2. S

    mf 50c instant reverse linkage

    transmission is apart everything so far looks pretty good needle bearings and washers went everywhere any suggestions what to use to clean parts besides brake cleaner thanks for the input I'm going to take all the linkage apart and clean I know the bearings you're talking about
  3. S

    mf 50c instant reverse linkage

    got her split tonight What I can see what a gunked up mess hopefully working on her all day tuesday to get out clutch
  4. S

    mf 50c instant reverse linkage

    I'm having a hard time finding bolts no problem finding all thread. I pulled fuel filter off and panel behind I have steering column exposed, its been raining ever since, I think I have most parts off and tractor ready to split. If things go right and alot of prayers I should be ale to split...
  5. S

    mf 50c instant reverse linkage

    started dismantling my MF-50c. So far, I have about 15 hrs. into it and most time trying to get the 4 bolts out of loader arms working on unhooking hydraulics I can't find any stud guides anybody know where I can get a couple 7/16's got 3 days of off and on rain so I'll be put Zin around...
  6. S

    mf 50c instant reverse linkage

    I'm going to reach out quite a bit I'm sure, I decided to support the bucket high enough to split like you said, Just waiting on weather I hope to have it done by july 4th
  7. S

    mf 50c instant reverse linkage

    I don't think filter or screen were ever changed brakes are bad so I'm sure you are correct, I can get the rings and a rebuild/gasket kit so I think I can rebuild clutch pack just a little worried about shims and needle bearings
  8. S

    mf 50c instant reverse linkage

    I have a service manual, the screen is rectangle and it was more than 100% plugged before I put on filter I cranked until I had fluid coming out so I think pump is ok I have a strange feeling its the valve and clutch pack
  9. S

    mf 50c loader removal

    Looks like a split cleaned changed fluid it was really nasty probably never changed clogged filter clogged screen I've seen cleaner mud puddles then the sludge that came out I let it drip for a week started it up forward no problem still no reverse it seems clutch or valve.
  10. S

    mf 50c instant reverse linkage

    when i push on reverse I hear a whining noise no reverse takes off forward my tach doesn't work for any kind of pressure check when I changed fluid and filters it was really nasty but i was able to see pump working at the filter so I figure split and hope I can do this I'm a 1 man show
  11. S

    mf 50c instant reverse linkage

    can anyone tell me how the linkage is connected inside trans on a mf 50c instant reverse?
  12. S

    mf 50c loader removal

    I know but I want to restore the old gal was never properly taken care. I need to get rid of "add" ons from former owner
  13. S

    mf 50c loader removal

    Thanks I'm waiting on the weather to break so I can dig in and see whats up I'll post to let you know what I find. I might just part her out.
  14. S

    mf 50c loader removal

    do you think it will be in issue to take apart?
  15. S

    mf 50c loader removal

    You seem to be very knowledgeable I was cleaning my driveway and lost reverse (instant reverse) thats why I might have to spit. I thank you very much for any info.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top