Recent content by Straanger

  1. S

    550, 770 ,880 Cluster gauges

    I know there is a place in Florida that the guys on the red power forum recommend. I also know that many of them frequent this site as well, so maybe if you ask on the farmall section of this site one of them would have the information. (I forgot my own sister’s name yesterday, so the fact that...
  2. S

    First post retirement project

    Definitely need to put something on there to let people know you’re not supporting Kubota!
  3. S

    Looking for an SO headlight mounting bracket

    That looks like a fairly legible casting number to me. A piece of paper and a pencil to make a rubbing should verify. Looks like 8041 or 1708 depending on the direction. If you’re not concerned with keeping the patina, a piece of sandpaper will just clean up the tops of the numbers.
  4. S

    Massey 65 low oil pressure

    Your tractor originally came with straight 30 wt in it. Why not use what it was designed for.
  5. S

    JD 5275GV

    You can get a heated fan at most truck stops (probably Amazon too) that plugs into a power outlet. Many of them can be bolted to something, so you could mount it where you want it.
  6. S

    4010 Roosa master not returning fuel

    If I had any ideas for you I would happily share them, but this time I don’t. My wife always says that I can’t go a whole day without making some sort of smart arse comment. You just happen to be on the receiving end of today’s.
  7. S

    4010 Roosa master not returning fuel

    Maybe it’s time for someOTHERguy. Sorry, I couldn’t resist.
  8. S

    1800 C electrical issue….melting battery cable terminal!

    Somebody probably turned off the fuel for transport
  9. S

    unofficial allis page

    I wasn’t able to get on here last night. Red Power Magazine forums have been acting weird for several days now. I go to that tab and get a message “ server error “ then get redirected to the main page, but, I then go to the menu and get to the forums, no problem.
  10. S

    2555 PTO clutch/brake lines questions

    I have no idea, but, I’ll bump you back to the top.
  11. S

    660 tie rods

    I hope you post pics when you get it done. I like seeing them pretty, I’m just too lazy to make them that way.
  12. S

    660 tie rods

    If it were mine, and I agree that it’s not, I would give it a good deep cleaning and buff out. Good coat of carnuba wax and step back and see what you have. 1 day spent cleaning versus weeks of paint prep. I’m too lazy for that.
  13. S

    Farmall 140 running rough - why?

    You mentioned fine black particles, like sand. That says to me that you may have an old fuel line that is starting to break down inside. If you replace it, make sure to use “green line “ that is designed for use with ethanol fuels.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top