Recent content by TateBauer

  1. T

    Timing

    just did it!! Worked great thank you!!!
  2. T

    Timing

    Thanks everyone!
  3. T

    Timing

    Folks I used a straw and verified it at TDC but the marks are still off. At TDC The marks are at the 12 o’clock position on the pulley and the pointer in the 2 o’clock positions looking at it from the front. 1/8 turn or so of the crankshaft past the pointer when it is at TDC. Other then pulling...
  4. T

    Timing

    Thanks for all the input guys! I for sure have the number 1 piston at TDC and the marks still don’t line up. Rotated the motor by hand clockwise looking from the front of the tractor. put my thumb over the spark plug hole and felt the air come out on the compression stroke I can visually see the...
  5. T

    Timing

    I pulled the spark pull and rotated the motor until the compression stroke. I’m hoping the pulley is tight and the key is in. It’s a new to me tractor so I’m trying to work the bugs out.
  6. T

    Timing

    I got 1947 H and I’m trying to retime the magneto but I’m having a problem with the time pin lining up with the marks on the crank pulley when the #1 piston is at TDC. Has anyone ever had that issue? Thanks!
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top