Recent content by terry kubiak

  1. T

    Voltage regulator

    Know that when I had the Lucas generators rebuilt for my TE 20 we went thru 3-4 regulators at the shop bench testing to get one that worked right. Might be worth the trouble depending what you have.
  2. T

    carb settings

    Seems I've seen the settings for the mixture screws for the carb for a starting point. Putting on a new rebuilt on my TE 20. Thanks to all
  3. T

    compression

    Have a 48 TE 20, What should be a good compression Number running and warmed up. Rebuilding the carb but wonder if the compression is in a good range. Slow to start. Runs good once it"s going. Thanks to all.
  4. T

    one for sale

    Saw one for sale on the road. TE30721 Had the 12 volt conversion New rear tires. He"s asking $ 2300.00 , OBO Ph. 330-635 6973. It"s in Brunswick Hills, OH. Just thought I"d throw it out there.
  5. T

    generator/ regulator

    John if I need to get a Delco regulator what would be required as re wiring ? will be double checking the generator shortly. Keep you posted . thanks again.
  6. T

    generator/ regulator

    Thanks to you both. Wil give it a try John. Let you know the result. Also dropped an inquirery as to a new regulator with the parts people. .
  7. T

    generator/ regulator

    MY 48 TE20 6 volt system So the generator is in , Indicator light goes off at higher idle. However don't show a significant charge at the battery and if I disconnect a terminal the tractor dies which says no charge. Has the lucas regulator. Does this indicate regulator issues.? Will the Delco...
  8. T

    generator /stumped

    thanks will give it a try on Saturday and let you know the resuls
  9. T

    generator /stumped

    Have the throttle up about 1/2 and it still stalls. No one local can test a 6 volt generator. Might have to take it about an Hr. away. drive. That's why I'm wondering if it could be regulator related. Points stuck ,etc.
  10. T

    generator /stumped

    Need some help. 48 TE20 Had the Lucas generator checked. New bearings, cleaned up . Told it was charging. Have it on. " Flashed " the unit. Have checked all the wiring,connections etc. New battery Charging light goes out once the tractor idles up. How ever if I pull the battery cable loose...
  11. T

    bulb

    thanks jeff . Got that squared away. Was able to repair my old socket. Still fighting the generator. Had it repaired and still not getting getting a charge,. Will read more on polarizing. Manual says to do it before you even hook up the wires to it. Didn't see that note until now. Will check...
  12. T

    bulb

    Very minor question. Anyone know the buld number for the discharge indicator on a TE20?
  13. T

    48 TE20 lucas generator

    Thanks so much John. Someone has rigged a cotter key to the small terminal but don'y think I'm getting good contact. Also worried about it gounding out. Will look around. See what I can find.
  14. T

    48 TE20 lucas generator

    Trying to get this squared away. This generator has no posts. Large push pin type connection on endplate with bracket to hold clip, external and a hole for another push pin in end plate,internal connection? Which is field and which is armature? Also can a post be added for the smaller hole so...
  15. T

    log lifter

    thanks . We'll try from the photo.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top