Recent content by theguydgaf3369

  1. T

    Mystery tractor

    My info could be wrong, but i have on a few occasions in forums been told that the same engine was used on the 310s and 311s, but does that block # help narrow down the year at all, or was that block # get used in multiple years?
  2. T

    Mystery tractor

    I have a tractor that does not have any id tags on it. The closest info i have for it is it may be a '56 or '57 case 310 or 311. This was established from a forum on here about 2 years ago, but parts and pictures do not match 100% from my own research. Recently the head gasket and exhaust...
  3. T

    Help with year/make/model refilling hydraulics

    I get ya. I figured it was like a forum rule to post pix or something. Either way, i figured it would be decent of me to show what i was working on, it is the least i could do.
  4. T

    Help with year/make/model refilling hydraulics

    I will be sure and check all that out. This is the only pic i have as of now, because i am still in the process of working on it. Someone did not care for her like they should have. Just thought i should mention, i am not trying to do a full restoration on this, she will be put to work.
  5. T

    Help with year/make/model refilling hydraulics

    Interesting. I had recently taken the tank off and tried to clean it the best i could before re plumbing the fuel lines. Not saying something didn't wiggle loose and pluging it but from the look of the flow, it seems fine. I do know that the carb that is on it now is not the correct one and...
  6. T

    Help with year/make/model refilling hydraulics

    Yeah, it has the dipstick and is a bit fuller now since i filled the hydraulics. I found the hydraulic leak where the hand clutch goes into the casing. That'll all have to wait till i can figure out the problem with it trying to die under a load. The linkage all moves freely but after a cold...
  7. T

    Help with year/make/model refilling hydraulics

    Ya know, i did notice about 3 tablespoons of fluid came out of the tall breather that is in front of where the seat goes.
  8. T

    Help with year/make/model refilling hydraulics

    So far, the hydraulic system is pressuring up just fine without the mower deck. Turns out there was a hell of a leak at some point and needed 2 1/2 gallons. With that solved, all i need is either a new/reman carburetor or a full kit. The choke and throttle flaps wiggle around a lot more than...
  9. T

    Help with year/make/model refilling hydraulics

    Thanks alot everyone. The people who owned it before me did all their own work to it, removing tags and replacing things with breathers. I really appreciate all the info. Now i have enough to go on till i can order a manual.
  10. T

    Help with year/make/model refilling hydraulics

    What is the purpose of the fourth pic? Isn't that part of the steering box? All tags for i.d. purposes had been removed so i don't know anything as for model or year for sure so i don't want to risk putting the wrong fluids. Is smell the onky way to discern what fluid to use? My main problem is...
  11. T

    Help with year/make/model refilling hydraulics

    I am a first time tractor owner. I had emailed someone at this site and he said it was a '56 or '57 case (not case ih). I am not doubting his knowledge, but when searching forums relating to refilling the hydraulics, nothing listed was where it was said to be. I do not understand jargon like...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top