Recent content by tim-m

  1. T

    Oliver 88 row. crop seat

    Thanks to everyone , I believe they changed the seat to get a better ride , soooo I am going on that route with the newer rubber torque springs.
  2. T

    Oliver 88 row. crop seat

    Can anyone help me with finding 2 rubber seat springs for a 88 row crop with a s/n 123864c ? Thanks in advance .
  3. T

    Choose Your Tractor

    806 Diesel, with a M and W Charger on it !
  4. T

    Sound of a Farmall H

    I enjoy the sound of an 806 with a straight pipe , bellowing in the cool night air pulling a plow.
  5. T

    Seized Model M

    The M I bought had a cracked block , water ran from the radiator to block , through the crack in the block and sleeve down in the oil pan. You may have to go to a tractor salvage yard to get a used block. If that the case , may even think about buying a 450 block for a little more hp.
  6. T

    Sound of a Farmall H

    I enjoy the sound of an 806 with a straight pipe , bellowing in the cool night air pulling a plow.
  7. T

    poor turn outs

    So important. ! The people, friends, can not talk about a pull they know nothing about over a cup of coffee , or at the dinner table sharing a meal. Look at it as a invitation ! Print them and send them out ! The hard working people who put on the show need to get a scoreboard that can...
  8. T

    Farmhand stack mover

    Does anyone with a farmhand stack mover have any pictures that show where the steinels go on the side of the mover. My son made a model and would like to put the steinel on it. Thank you Tim.
  9. T

    Farmall 560 no fuel to injectors

    Remove the 3 screws on top cover, and with the cover off ,with your finger ,rotate the metering valve. ( The metering valve is located under the shaft that carry the governor spring. The metering valve will have a little lever fasten to it. ) . It should rotate quite easily.
  10. T

    Okla Winter Nationals

    topsarg, will the results of the Oklahoma Winter National be posted ?
  11. T

    Disk size

    A lot of would depend on the angle of your gangs guys.
  12. T

    Rumbly 6 A

    Does anyone have a photo of a Rumbly 6 A tractor they would share on this site ? Thank You...
  13. T

    Thanks Porter Peach

    Thanks Top Sarge for store Thanks for the pictures and story about the pulls Top Sharg, looks like everyone was enjoying the pulls !!!!
  14. T

    Model 70 JD Diesel

    Check out Atwoods or any farm and ranch supple store in your area. A log chain hook may just have the right pin, that would fit.
  15. T

    Pull Results for Riverbend

    Thank you , for posting results and photos for us to keep tabs on our favorite puller, when we are not able to attend.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top