Recent content by Tim Nelson

  1. F

    Timing Case 140W bailer

    Ive red the orange and white operators manual till im blue in the face. IF it tells how to time it, I cant find it anymore. I would think that if I brought the plunger all the way out through the chamber until it starts to retract, that that would be the time to put on the bottom chain from...
  2. D

    F20 Flywheel

    I would like to remove the flywheel on my f20 and am not sure if the nut that holds it on is right hand thred or left hand?
  3. L

    filling hydrolic resevoir/differential on a Massey TO 20

    how do you get hte oil into the hydrolic pum/diferential case? I can't fint the filler plug??
  4. A

    Economizer Jet

    Can anyone explain how this functions? Thanks.
  5. H

    head bolt question

    I'm replacing my head gasket on 9N 222933 , I found that the head has more gap than might be acceptable, I have another head off another tractor that I salvaged that shows less gap than the one that was on there. The one on there show about a 20+mm gap , the one I am putting on shows about 5mm...
  6. A

    Farmall h front end

    Ok i got a question. I wanna put a c bolster on my h. What hubs are you guys running so i can use press steel rims. Ive seen it done before. Just wondering on the hubs and bearings to use. Or any other front ends that would work. Thanks for the info.
  7. T

    JohnDeere Transmission interlock

    well of course the dealer doesnt have the pin that is required to be replced when replacing switch. Kid looked at me like I was nuts, but I had the instructions with me with part number required or I might still be there!
  8. T

    JohnDeere Transmission interlock

    Find someone else to motivate ,alright. Tractors have been around for years without neutral switches, for safety!
  9. T

    JohnDeere Transmission interlock

    Pick one up tonight, but instructiond say to replace the pin in tranny that contacts switch. So back to dealer to buy the pin. I would've thought it would be part of the kit for 41 dollars. Oh well, its not bad to work on and get at. Thanks for your help with his project.
  10. T

    JohnDeere Transmission interlock

    buckanddeere, again shut the hell up. Your inteligence is showing!
  11. T

    JohnDeere Transmission interlock

    Sir, I know the risk, thank you very much. I was told there was a recall kit Jd fixed issue with. If you cant say something nice, keep your mouth shut!
  12. T

    JohnDeere Transmission interlock

    Thanks, is there a way to bypass this feature?
  13. T

    JohnDeere Transmission interlock

    Having issue with tractor not starting because of Trans interlock not making connection or something. If you wiggle shift levers or in and out of park it eventually will start. Not sure where to start to diagnose. A little help would be greatly appreciated. It is a 76 JD 2640 with 8 forward 4...
  14. T

    JD 146 Loader

    So when you say lift the loader, do you mean by hand? or with a winch? Is it a weight balance of the loader and bucket position? Thanks forthe help. Tim
  15. T

    JD 146 Loader

    Does any one have laying around they will sell, or can provide me with dimensions of the Lift arm for removeing and installing loader to tractor. Arm is offset, one end mounts to tractor frame and other to loader tower(which this end is a slot). Didn't get with 2640/146 tractor/ loader combo. I...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top