Recent content by trpaul1

  1. T

    super h power steering

    Thx, That is what I will do. I will put the priority valve in the hyd line from the pump to the hyd unit and plumb the hyd fluid to the PS unit. I don't have other hyd uses so the use of this hyd pressure should not be an issue. My only issue is securing all the fittings I need for the plumbing.
  2. T

    wanted model G AC

    I live in Illinois and would prefer one in the Midwest. Thx
  3. T

    wanted model G AC

    I would like to buy a G for garden work. It doesn't have to be in great shape, but operable. Thx
  4. T

    super h power steering

    thx Jim, my model has the front mounted pump
  5. T

    super h power steering

    Will the tractor hydraulics power a char-lynn power steering unit? I have unused hyd outlets on my tractor.
  6. T

    super h power steering

    I want to add power steering to my super h ih. Is tractor hydraulics adequate to power char-lynn pump? If not, how do you configure the pump without altering the hood? Can I add a pulley to the fan shaft without altering the drive belt configuration? Do you know a supplier who sells the...
  7. T

    ford or ferguson hay rake

    I have an old hay rake and want to rebuild it. Its a light blue, 3pt, 6 reel bar, 540 pto rpm with star shaped cast iron drive and driven reel bar carriers. Can anyone help with a model #? Also, the spring clamps are rusted and I'd like some advice on how to remove them. Thanks
  8. T

    ih 1086 starter engagement

    subject starter will not engage when shift is in park. I suspect the problem is in the "neutral starting switch". Where is it located and what disassembly do I need to do? The tractor has hydraulic clutch. Starter will engage with the clutch depressed but not in "park". Do I need to remove...
  9. T

    replacing safety start switch on ih 1086

    Is this switch in the shift compartment on the shift lever? I would like to know before I start disammbly. thx
  10. T

    replacing safety start switch on ih 1086

    subject safety plunger switch does not allow starting when tractor is in park. please give me any tips on replacing this switch in the gear shift enclosure. thx
  11. T

    starting farmal super h

    You were right on. DiThrect wiring the battery to the coil was successful. Thx. Is there a fix to make this permanent?
  12. T

    starting farmal super h

    direct hot wiring the battery to the coil worked. Is there any way to wired this for a permanent fix? thx for all responses.
  13. T

    starting farmal super h

    my super h is hard starting. at overhaul I converted it to12 volt. Now it is difficult to start. It cranks fast, but only starts as cranking stops. I can only guess, it is timing, wiring or fuel. Sometimes it starts and runs ok. Ideas? Thx
  14. T

    power steering units

    I am looking for a complete power steering unit for my super h. sources? manufacturers?
  15. T

    1086 ih

    my 1086 while road driving with ta in low, lost speed going up hills and suddenly jerked into normal speed. I moved the ta to high and it ran ok up hills. what do you think is the problem. I need this tractor to haul grain wagons to the elevator. thx
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top