Recent content by wagdriver

  1. W

    has anyone bought the engine rebuild dvd

    I purchased the DVD last year prior to doing a rebuild on my 640. I have had no problems using the DVD and I found it to be very useful. It takes you thourgh the rebuild step by step and you always have it to refer to if you have one of those frequent brain carmps the come with old age. I would...
  2. W

    640 water temp pickup removal

    The two previous gentlemen have good advice. I would add if you have time is spray the fitting with PB Blaster or any good penetrating solvent. The main thing is don't get in too much of a hurry. I have had items that would not budge, especially if you know they have been there for years, and...
  3. W

    4600 Oil Leak

    Plastic alingment tools can be had cheap from YT!
  4. W

    brush cutter

    There is one thing I have found in referance to keeping the brush cutter clean. I use plain old leaf blower to clean off the the cutter and the tractor as well. It works great and doesn't take very much time to do it. I use an electric one that may be a problem for some, but any kind would work...
  5. W

    Question for Soundguy

    The transmission, hydraulic, and rear end are all separate compartments. The hydraulic lines pass through the transmisson case and are sealed with O rings. There should not be any mixing of gear(80/90)oil or hydraulic oil unless there is a breech of one of the oil ring seals.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top