Recent content by warhawk07

  1. W

    Grapple on 870 tractor with 440 loader

    Looking to add a grapple to my 870 and as the post suggests, it has a 440 loader with a pin on bucket. Have a bunch of questions but will throw them out there one at a time. Lots of challenges. My first question centers on hydraulic options. Seems like the cheapest, easiest and most...
  2. W

    JD 870 starting problem

    Ok got back to fix this over the weekend and I had a blown 3a fuse Fuse replaced and tractor starts no problem. Appreciate the feedback thanks
  3. W

    JD 870 starting problem

    according to the diagram yes there are 3 wires as for the unit itself....im assuming its original and has 3 wires. by the time i got the unit back into the shed Saturday, it was late so i didn't mess with it at all. trying to get back up there this weekend so will know more then
  4. W

    JD 870 starting problem

    Thanks for the reply....
  5. W

    JD 870 starting problem

    Sorry correction....power for the fuel shut off solenoid starts at the battery to STARTER (not Alternator as noted in previous post)
  6. W

    JD 870 starting problem

    Ok im a little more educated today than yesterday.....couple new questions. Bear with me as my day job is in commercial banking, Im a half a...sed farmer on the weekend ha. Just trying to gather as much info as i can on this as the tractor is located 300 miles from home at my hunting...
  7. W

    JD 870 starting problem

    appreciate the reply going to be a week or two as i don't live near the machine. i will start with the fuses and work from there
  8. W

    JD 870 starting problem

    As the subject line suggests, i developed a starting problem with my 870. Ran it it all day yesterday, and as i was driving it back to my shed where i park it, the unit completely shut down. no electrical power. turn the key, nothing. checked the battery compartment and discovered the...
  9. W

    IH 574 diesel fuel pump leak

    thanks for the reply. by the 17 mm bolts im assuming your talking about the bolts on those banjo fittings??. i have since cleaned it up and its definitely not leaking out the banjos...its leaking from the plug. i would have posted a pic of the cleaned up area but all i have is a screen shot...
  10. W

    IH 574 diesel fuel pump leak

    Hello, Have a 574 diesel that i use for food plotting in northern WI and i have a fuel pump leak. doesn't appear to effect the operation of the tractor...it starts and runs fine with the leak. please bear as i describe where its coming from as i am a commercial banker during the day and a...
  11. W

    M-M p3 drill problem

    Really appreciate the reply. Dont make a special trip to look yours over as I messed around with it more yesterday. You are correct that the two screws are set screws that do not bolt into the shaft. What threw me off isas indicated the parts manual lists the two set screws as the same part...
  12. W

    M-M p3 drill problem

    Hello, first post here. i originally posted this on the implement forum but it was suggested to throw it here. i modified it slightly so it hopefully makes more sense than the other post ha i have a M-M p3 13-7 hydraulic lift drill with one half that works fine. on the other side the feed...
  13. W

    Minneapolis Moline drill problems

    thanks, i will. wasn't sure if that was a tractor only forum and i didn't want to get pillaged for posting on the wrong forum :lol:
  14. W

    Minneapolis Moline drill problems

    Hello, first post here. i have a M-M p3 13-7 hydraulic lift drill with one half that works fine. on the other side the feed shaft isn't turning and the gears also are not turning. the problem i believe is the drive sleeve with the two set screws isn't engaging. the axle shaft driven by the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top