Recent content by Wavrider

  1. W

    Air Compressor Motor

    TSC tractor supply has a 5 horse single phase 220v for around 170$ taxes varies from state to state. Put on on my old air compressors works great. Original 2 horse motor finally gave out after 12 years service.
  2. W

    whats it worth

    Loks a lto like my 19-105 loader, step through and all.
  3. W

    Radiator question

    Air conditioner coil cleaner. The type used to clean condensor units outside have an acid base to them and will clean about anything but does not harm the metal. I have used it to flush my old international scout truck radiator n engine before with excellent results.
  4. W

    Ford 600

    I picked up a 640 few months back. My son and I worked on it and got it running including new paint. Parts are available at reasonable prices. Cant go wrong if just looking for a chore tractor or small farm workhorse. I have used mine for plowing, disking and have a 19-105 front end loader...
  5. W

    1956 640 temp gauge

    John, Glenn, Both great suggestions thank you, I do have a digital thermometer I used for doing heating and A/C work so I will use that to check the temp next time I use the ole 640, which will be after I replace the hose, darn thing is hard to steer with that loader on it unless moving. I...
  6. W

    1956 640 temp gauge

    I purchased all new gauges and installed them. Seemed to be working great until today. I finally got the 19-105 loader on the tractor with the front root rake (came with tractor looks fabbed) and was busy plowing up old pine tree rots when I noticed the temp gauge slowly rising. I shut the...
  7. W

    Clarke MIG Welders

    The wire feed of any welder is critical due to the amount of pressuer usd on the drive wheels. The condition of the liner in the cable. the type wire being used. There are different size drive wheels for different type of wire sizes also. I Completed the Lincoln basic and Advanced welder...
  8. W

    printed circuit board repair

    Circuit board repair. Innovat Corp. 1-800-626-1887, Ask for Derek Holmes, I metthis young man while goiong through Lincoln advanced welder repair school. I am an "old school technician", taught tube theory when I went to school for electronics in the NAVY. Web site is www.innovatcorp.com...
  9. W

    Soldering iron question.

    Soldering or "tinning" a wire. The best results will be achieved of the wire is cleaned first. regular isopropyl alcohol will work. Using either a liquid or paste flux, flux the wires to be tinned. This will remove any impurities in the solder joint. Clean the tip of your soldering iron with...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top