(800) 853-2651
SHOP NOW

Recent content by Wayne Montgomery

Yesterday's Tractor Forums
  1. F

    Massey 33 Drill Conductor needed (x15)

    Part number 440903M91 seems to be a $40+ part. I need all 15... anyone know a more affordable replacement part that would work? I might just buy one or two as patterns and see if I can make em, but time.....
  2. D

    We got rained out Tuesday.

    We had a pull Tuesday afternoon that started out hot but ended with rain coming in fast than fore casted and had to cancel after 20 minute down pour. Going to give it a try at another county fair Thursday if it doesn't rain to much.
  3. Z

    Farmall 656--knocking sound in 4th gear only

    I've noticed lately a knocking sound in my Farmall 656 transmission. It only seems to be in 4th gear. It's fairly rapid and regular. It goes away on a coast or light load. There isn't any sound in 3rd or fifth gear. So doesn't that mean it's something forward of the differential and rear...
  4. D

    prep for paint

    I have cast tractor housings that have all the paint sandblasted off and then sat for over a year in a shed.They are all rusty know. What is the best way to prep them for painting?I would like to paint all cast stuff first before I do the tin work. Thank Bob
  5. showcrop

    A little machinist help

    I need to install a 3/8-16 Helicoil in the engine block that I am working on I have the coils but the tap is missing from the kit what should the tap be? it looks like a 7/16-14 matches up but it seems like it should be 7/16-16
  6. R

    OT-computer buying on shopping networks

    Looking to buy new computer & was wondering if anyone bought one from the shopping networks & their experience?
  7. 0

    age 58 , What about number of ENGINES

    HOW many engines motors do you fellas keep runnin? on your place , or at work?. for you guys that fix jet airplanes and fergie tractors./// I mean chainsaws , weed wackers , tillers, gas powered air compressors , all the way up to the d-8 dozer and big budz brother ... and how many would...
  8. J

    Up and running

    Had a friend put a used tire on my tractor, so I'm up and baling, glad I had the little tractor to Ted and rake, I did run the baler on it yesterday to be sure the baler was working.! Lol hay dosent look to bad for being so late on first cutting.
  9. G

    Farm King Garden tractors

    Does anybody have any knowledge of the above tractor brand. Manufacturer? Years made? Quality of unit? I have had little success in my research regarding this name. Any info would be appreciated. Thanks.
  10. bwillett

    656 Gas utility loader

    A friend has a 656 Gas Utility tractor, and just bought an IH model 2000 loader for it. He has 2 questions. 1. Are there spacers between the front mounts and the frame??? 2. Does he need to flip the wheels side to side to get the dish reversed for tire/frame clearance? Thanks in advance.
  11. E

    johndeere weld on hubs

    who sells weld on hubs for a johndeere A
  12. S

    VH4D the verdict is in !!

    Well, I considered all the advice I got, at times it gets hard to pick which way to go. I decided to review some old post from el toro , bob, Ralph . El-toro kept asking about the timing and posting a picture of the flywheel and different marks. So I decided to really read what he was saying...
  13. R

    Question for John T

    Recently someone made a statement about balancing the load in a panel. Lets say you are not using any power for anything else, but you have a 1500W 120V heater in a pump house. Would it cost more to operate than a 1500W 240V baseboard heater? (assuming they were on the same amount of time) I...
  14. A

    Cockshutt Puller Carb Question

    Building a 3400 Hercules. Would a Stromberg 9 with a custom made intake work? Engine will be 401ci and wanting our rpm range to be around 6-6,500. Any suggestion would help. I also have a 4 barrel updraft Zenith I could use if better.
  15. T

    CENEX vs FS Premium Diesel fuels

    Just wondering how many people use these two brands of premium diesel fuel? We use the Ruby fieldmaster from cenex on the farm but we are starting to hear that the fs cooperative a couple towns over offers a very (and i mean extreamly) comparable diesel with an additive package for about 15-20...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top