Recent content by Wdry7

  1. W

    Ford 3000 cav injection pump

    Thanks for replying. The blades and liner were very tight, I did not see any signs of wear to the inside of the liner. I did not pull the cam out, as the bolt did not budge, looking from the end of the pump it looked ok, I didn't see signs of excessive wear, I only remember 4 lobes though...
  2. W

    Ford 3000 cav injection pump

    I have a '65 Ford 3000 diesel. It runs good, but the injection pump leaks, so bad that when I turn off the fuel valve at the tank, it would loose prime on the IP. When I would bleed the injector lines, there is a big difference in the amount of fuel coming out of #1 line vs #2 & #3(almost...
  3. W

    Ford 2000 power steering gear box

    Solved it! took it to my neighbor who has a press and with a little pressure they came right out. Wish the manual would had said that!
  4. W

    Ford 2000 power steering gear box

    How do you remove the drive bushings from the steering box? Are they pressed in? I have tried to drive them out using a block of wood and a 2 lb hammer with no luck. Thought about heating with a torch and trying to drive them out, but if they are pressed I don't think that would work...
  5. W

    cav injection pumps on ebay, are they any good?

    I guess its buyer be ware, was the pump you are refering to a suposed "rebuilt pump" or one the the aftermarket new ones? Have you ever come across one of the aftermarket brands, if so what is your opinion. I'm not counting out having mine rebuilt, I'm just weighing my options and trying to...
  6. W

    cav injection pumps on ebay, are they any good?

    Thanks for your reply, I appreciate your honesty.
  7. W

    cav injection pumps on ebay, are they any good?

    Leaks like a syve, runs rough, starts ok, when you disconnect all 3 lines from the injectors as to bleed the air from the lines, 1 & 2 have good volume but 3 is considerbly less. I have always added Lucas injector cleaner since the mandate for ULSD, thats when it began to leak, cleaned the...
  8. W

    cav injection pumps on ebay, are they any good?

    Thanks for your reply, but I"m looking for actual facts, some one who has first hand knowledge of these pumps, not opinions. I know these pumps don"t possess the quality of a new OEM pump. A rebuilder is in the business of making money and building a good reputation. I doubt they would...
  9. W

    cav injection pumps on ebay, are they any good?

    Does anyone have any knowledge of the quality of the after market cav injection pumps for a Ford 3000, that are being sold on ebay? For the cost to have mine rebuilt I can purchase a new one. Thanks
  10. miner09

    F-40 Gray--Green

    Trying to buy a F-40 that looks to be original with gray-green paint. Serial 403085, looks to be a high # for green and gray to me. Looks to be original. Anyone know anything about the colors and serial numbers? He's a little high on price. Thanks Mickey
  11. W

    price of a 51 dc

    i found this 1951 case dc that has ok tires good sheet metal the motor is free they said it ranabout two years ago it has been kept in barn all this time it also has the two point lift with two row middle buster on I just need to know the value the people wants a best offer on it
  12. W

    Ford 2000 leaky injection pump

    My '72 2000 with a CAV injection pump constantly drips fuel from around the throttle shaft, while running. It was fine until I was forced to use ULSD. Because of the low sulphur content I began adding Lucas to the fuel. My guess is it (the Lucas) cleaned out all the gum & varnish from around...
  13. W

    tach needle swings constantly

    I had the same problem on a '65 3000 diesel. the end of the cable was worn to the point that it was slipping inside the gearbox on the generator. Thus the swinging effect on the tac needle. If the grease doesn't help look at the cable ends for signs of wear.
  14. W

    Ford 2000, can I change valve stem seals without pulling hea

    Thanks, I'll try this before tearing into the engine.
  15. W

    Ford 2000, can I change valve stem seals without pulling hea

    I have a "72 Ford 2000 3 cyl. diesel, very little use the past couple of years, but started regularly. Recently it started blowing oil out the exhaust, no smoke until I give it all the throttle,and then quits smoking. Compression is good in all 3 cylinders, and it starts and runs good. I"m...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top