Recent content by whigg

  1. W

    1966 cub lo boy.. paint. Hood. White.

    Your local NAPA store can make the color you need in automotive paint in a spray can.
  2. W

    Int. Cub color?

    Thank you.
  3. W

    Int. Cub color?

    You are right. VIN is ( 16477 ). I think it should be yellow with white. Thank you.
  4. W

    Re: 1964 cub generator belt

    Dont turn the back nut. On the front of the bracket there is a hex that will turn the shaft out of the nut in the back and you can slide the fan assembly up and out.
  5. W

    Int. Cub color?

    I just picked up a int. Cub low boy. I believe it to be a 1963. It has red paint under blue paint and the outside is 2 coats of different yellows. Can someone help me with what color it should be. I believe yellow with white wheels. ( The vin is 167477 J ) thanks for any help.
  6. W

    38 John Deere B

    Guess Ill have to stick with the lighter class tractors. I guess it was to heavy for it..thank you.
  7. W

    38 John Deere B

    Took my 38 B to the first pull and it seems like the governor is not working and after a few feet it runs out of power even in low gear pulling about 6500 pounds stone boat. Weighed in at 4500 lbs..thank you for any help.
  8. W

    Distributor

    I have a 1974 IH 574 tractor with a C-200 gas engine and need a new distributor have this one rebuilt. I believe it is a Prestolite but the tag is missing. any thoughts on my next step.Thanks for any help with this.
  9. W

    rock shaft

    Thank you all for the info. I have good chains and a good support. going to take rock shaft and power-roll off together. I hope.
  10. W

    rock shaft

    I need to remove the rock shaft on 49 J.D. B. Is there anything I should be aware of before I start ?Never removed one before. Thanks for any info.
  11. W

    J.D. B power trol.

    Thank you
  12. W

    John Deere B Power Trol

    I am going to keep it for now but if I change my mind I will let you know.
  13. W

    John Deere B Power Trol

    I have a 49 B that I am going to take the power tool off and put a flat back on. I have never done this before. Is there any dos and don'ts I should know about before I start. Thanks for any help.
  14. W

    J.D. B power trol.

    I have a 1949 J.D. B and taking the power trol off and putting a flat back on. My question is will a flat back cover from a 1952 J.D. 50 have the same bolt pattern and fit the B . Thanks for any help.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top