Recent content by Whipper Snapper

  1. W

    rebuilt carb

    So I was out driving my tractor and it started to get all herky jerky and kept dying. I pulled the fuel line off and discovered that the interior of the fuel line had sluffed off and got stuck in the carb fuel inlet valve. I figured that since I had the carb off I might as well put the rebuild...
  2. W

    12 volt issues

    Thank you so much between the FO-4 and your very descriptive steps I got the tractor up and running this weekend and she purrs like a kitten. This tractor definitely doesnt like 4th gear she bucks like a mule out the gate. But other then that I am well on my way towards getting going on my...
  3. W

    12 volt issues

    I bought a 1947 8N recently and it didnt run at the time that I bought it so I figured that I would do some necessary tuning to it before I tried to start it. Additionally it needed a head gasket replaced. I did the head gasket job and put new plugs, wires, sediment bowl, and points and rotor...
  4. W

    radiator cap versus hood round 1

    Ok so i looked at the radiator and it has no pads under the mounting bolts. i am going to try to lift it up using some old tire cutouts and see how that works out. It doesnt show any signs that the neck has been worked on and it is centered on the hole in the sheet metal. Thanks for all the help.
  5. W

    radiator cap versus hood round 1

    I recently have become the proud papa of a 1947 8N that had a blown head gasket. That in itself wasnt that big of a deal. got it fixed and running again and now I am changing out parts little at a time. Radiator cap was just your everyday run of the mill cap but it scratches the dickens out of...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top