(800) 853-2651
SHOP NOW

Recent content by WRA

Yesterday's Tractor Forums
  1. W

    Ford 4610 Checking the hydraulic fluid in the rear end

    There is an oil level check port on the rightside of the rearend housing.
  2. W

    Massey Ferguson 285 head gasket

    Thanks David and Dave for your input,I should have stated earlier the engine is the 318. I have checked the archives of this forum on everything related to this tractor or engine and am aware of the potential for head gasket problems. That is why we were extremely careful in the cleaning and...
  3. W

    still trying to get M started.

    Yes it is wher the fuel line connects to the carb ,you should have two sets, the one that is actually fitted into the carb and the other is the the fuel line connection,Remove the fuel line then remove the other, it is more like a screen but you will see if it is dirty or clogged . Hope this helps.
  4. W

    still trying to get M started.

    just like everyone else said it could be the timing also have you pulled the fuel line off then open your fuel valve to see how much fuel is really coming out from the tank and also check your filter inside the carb because you may be getting some fuel but not enough.
  5. W

    Ok, that is ridiculous!

    Wow!!! He must have put alot into it to have a reserve that high!Maybe someday he will get what he wants out of it!!
  6. W

    manual

    You are right I should not copy it. But do you think it is safe to send it thru the mail for someone to use and send back. Would like input on this matter Thanks!
  7. W

    manual

    Hello Gene.This is a shop manual Super and non super.Series,A,B,C,MTA,H,M,MD,cub,MTAD,4,6,D6,W6TA,W6TAD,9,D9. It covers Engines, transmisions,PTO governors lift alls, just about everything.I could send you the manual, copt what you need send it on to the next guy who needs it and so on until it...
  8. W

    manual

    I noticed the manual no IH-8 I have one in good condition.I am not real good at computers but my wife could help scan and send if anyone needs it.or I might be able to copy and print the pages and send them thru the mail .
  9. W

    Farmall M value

    That is a good deal.According to my owners manual it says that the minimum width outside of edge of rear axle is 84.5 inches.Maximum to outside edge of rear wheels is 96 inches.
  10. W

    curious

    Thanks.It has the pump on the distributor.Battery under the seat,starter switch lever action.So it must be a stage 2 thanks for the information.don't know what year it is I will look for the serial numbers to find out.Thanks again!!
  11. W

    curious

    I have noticed that on this forum you guys have talked about a stage 1 and stage 2 super H what is the differences.because my dad has a super h had it ever since I was a kid on the farm . it just says super h just wanted to know how which kind it is. Thanks
  12. W

    thanks

    I have posted quetions before and gotten good advice.Have givin some too,just wanted to say thanks and this is a good forum with knowledgable people.It is really helpful,some more to others. Keep up the good work and hope all of your projects come together.and keep all of those old farmalls...
  13. W

    You know you're having a bad day...

    went to ebay to check it out still cant figure it out truly is a smoker complete with hydraulic drive. holes thru the fenders for the hydraulic lines. it would have been better to make it original and taken to parades than to cook on. just don't understand people sometimes.
  14. W

    You know you're having a bad day...

    they have no respect for our history of farm machinery to take a beautiful H and turn it into that just stinks. I love my farmall I grew up with them. And I would never dream of doing something like that to such a thing of beauty!!!!
  15. W

    IH 706 miss

    When you replaced the injector did you bleed it off,to get the air out of the line and to be sure you are getting fuel to it.if so do a compression check.you may have a burnt valve or rings may be worn. good luck hope you get it going
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top