Recent content by wrbix

  1. T

    pics for Richard L

    was the Molson good Richard? I owe you a case. That boat grease your friend had kept the bearing cooler than the other side! Dieseltech did a triple check later that day, it went for another couple thousand miles..but on a rotary 5 miles from my home the pad came off the brake on that wheel- it...
  2. 4

    Abg 90 plow

    Looking for an abg 90 plow in the within 300 miles of Sioux Falls sd
  3. J

    Thanks going out to t.r.k.!!!!

    t.r.k.: You where spot on about where the deck drive belt adjustment was on the White/MTD LT13 mower. It was under the tunnel/floor panel. I adjusted it to move the deck forward a little more when it was in the disengaged position. I then had to adjust/bend the spindle brake straps that are...
  4. A

    Welding a VAC Drawbar

    About five years ago I bought a nice little '54 VAC-14 out of Howell, MI. After doing just a few quick repairs on it I parked itin the shed. Well, hopefully I'll get a chance to work onit this summer. Some things needing immediate attention: •Loose rear wheel •Re-work seat suspension...
  5. A

    t/a 666 farmall

    t/a works on low side only if held back by hand cculd someoneplease suggest what the problem might be thanks Doug
  6. W

    Fence chargers

    I've gone through a Zareba unit about every 2 years for the past decade. The one that comes back from repair is kept as backup until the previously repaired one dies. Lightning seems not to be the cause. Seems I can discern a decrease in the volume of the clicking sound from the box as it's...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top