(800) 853-2651
SHOP NOW

Recent content by Zach Scherf

Yesterday's Tractor Forums
  1. M

    1938 Model G John Deere

    Would it be possible to use the later rods with the insert bearings.Mine are all most through the babbit.I haven't micked the crank yet so don't know if the crank needs ground.I plan on using new pistons.Thanks for any info on this.Ron
  2. Z

    Oliver white 3 pt problem

    You can call anytime, I'm removing the housing cover over the servo valve right now since I have steering and 2000 lbs pressure at the remotes but no 3 pt lift.
  3. Z

    Oliver white 3 pt problem

    Give me a call 2195611353
  4. Z

    Oliver white 3 pt problem

    My white 2-150 which is the same as some old Oliver's won't raise the three point after I changed a leaky hydraulic hose. The hose I changed runs up from the pump and above the 3rd point then back down the other side. I cracked it and it has little to no air in it. I cracked the hoses on...
  5. Z

    1494 erratic hydraulics

    I am looking at a pair of 1494 tractors that could possibly be for sale for a reasonable price. The only issue is the hydraulics. Owner states on both of them only one remote of the two is working. The three point is also bleeding down. Sounds like an I ring issue or stuck valve inside? He...
  6. Z

    Ambac Injection pump

    <image src="http://forums.yesterdaystractors.com/photos/mvphoto23926.jpg"/>
  7. Z

    Ambac Injection pump

    What should the pressure be coming out of the fuel filter into the pump diesel tech? Also how would I test that? Tee a pressure gauge into that line with tractor running or would off be ok? I have another inline pump rated for 40 psi, would that be too much fuel? Also I am going to post a...
  8. Z

    Ambac Injection pump

    The motor that was swapped in was different than the engine that was originally in the tractor. The pump on it now was on the engine when we pulled it from a truck to put in the tractor. The electric pump has as 35 gallon per hour capacity. 4-7 PSI I believe. Would that be enough?
  9. Z

    Ambac Injection pump

    I have a white 2-150 tractor that i swapped a 465ldt multifuel engine into last year. It saw limited use, but this year i got all of the bugs worked out. The tractor idles great, runs great at any rpm when under no load. This year i tried to use it for fieldwork and ran into a problem. It runs...
  10. Z

    Tx Jim, Roger, Baler help!

    Ok I'll grind the rough spots off and make sure I welded the leading edge like you said, but I'm pretty sure I did. On the gate the actual gate is opening.
  11. Z

    Tx Jim, Roger, Baler help!

    My 535 baler had trouble starting bales so I took your advice last year and welded some beads on the metal starter roll. Now the net wrap started wrapping up on the starter roll and john deere's suggestion is to grind the weld off. I'm afraid it may have trouble starting the bale again, but...
  12. Z

    Michigan City Indiana

    Forgot about Heston. Yes definitely go there it's pretty awesome.
  13. Z

    Michigan City Indiana

    I have a farm in michigan city. Nice down 421 isn't it. They grow lots of seed corn and other specialty stuff down a ways including taters and tomatoes. Big fields is a lot different down there from up with the 40 acre fields being big. If you have time to kill if recommend a drive up into...
  14. Z

    Anyone buy a new Stihl chainsaw?

    Bought a Stihl last December that sees pretty good use on our farm. Couldn't be happier with it.
  15. Z

    Going back to work again

    Live in michigan city. Uncles son running the crane at the power station there. Pretty big job seems like. Bad part of town is north end, everywhere else is fine, north end is just a little rough.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top