bigger wheels tea20

[Jim.ME]

Your rear tires are 13.6-28 on a 12" wide rim.

Now to answer what size front tires you have as John Deere D asked. Like the rear tires there as the size number, besides the diameter. a 6.00-16 is smaller than a 7.50-16. Again, rim width can control the tire that fits correctly.

 

[John Deere D]

13 6 12 28 i believe they are masey 35 tires and rims.The guy i got it from may have put on?

Take note of my post on June 6, 2026.......

Take note of Jim.ME. post on June,21,2026....

 

[GSW]

Your rear tires are 13.6-28 on a 12" wide rim.

Now to answer what size front tires you have as John Deere D asked. Like the rear tires there as the size number, besides the diameter. a 6.00-16 is smaller than a 7.50-16. Again, rim width can control the tire that fits correctly.

Take note of my post on June 6, 2026.......

Take note of Jim.ME. post on June,21,2026....

My fronts are 16 in x 6 in wide. The tires are old and writing worn off.

 

[GSW]

My fronts are 16 in x 6 in wide. The tires are old and writing worn off.

 

[John Deere D]

The Ferguson TEA-20's that arrived (from Coventry England) in my area (North western Alberta Canada) ran 10 X 28" REAR TIRES......
Front were 4 X 19" Tires.
..
As the above sizes are no longer readily available.........

Pic is of my Ferguson TEA-20 with 12.4 X 28 Rears
4.00 X 19 Fronts

You can see the front end is lower........

Your TEA-20 FRONT HUB is the same as my MF 35.........

Your FRONT HUB has strength Gussets cast into the front Hubs.

NON of my parts TEA-20s or my daily user has GUSSETS Cast into the front HUBS.

NOTE
The entire front SPINDLES from a TEA-20 are a direct fit onto my MF 35 Manufactured in England.

I had a front spindle on my MF 35 fail, due to to much weight on the front AXEL,.....LOADER now removed
Bob...

 

[GSW]

The Ferguson TEA-20's that arrived (from Coventry England) in my area (North western Alberta Canada) ran 10 X 28" REAR TIRES......
Front were 4 X 19" Tires.
..
As the above sizes are no longer readily available.........

Pic is of my Ferguson TEA-20 with 12.4 X 28 Rears
4.00 X 19 Fronts

You can see the front end is lower........

Your TEA-20 FRONT HUB is the same as my MF 35.........

Your FRONT HUB has strength Gussets cast into the front Hubs.

NON of my parts TEA-20s or my daily user has GUSSETS Cast into the front HUBS.

NOTE
The entire front SPINDLES from a TEA-20 are a direct fit onto my MF 35 Manufactured in England.

I had a front spindle on my MF 35 fail, due to to much weight on the front AXEL,.....LOADER now removed
Bob...

So,do i have a tea 20 / 30 tractor? I believe it's a combination of a couple tractors