Ford 256 I6 head bolts?

[Cutlass327]

Found my head gasket leaking oil, ordering a head gasket, but would like to have a new set of head bolts too. Anyone have a PN for new bolts?

Edit:

74 Ford 7500 with 256 turbo diesel

 

[Sean in PA]

Which model tractor and year?

 

[Cutlass327]

Which model tractor and year?

74 7500 with 256 turbo diesel

 

[Sean in PA]

A 1974 7500 should have 1/2"-13 x 4 3/4" head bolts, part number 83907721. They should be available at any new Holland dealer.

 

[showcrop]

Studs from ARP are becoming very popular.

 

[Cutlass327]

Studs from ARP are becoming very popular.

Any particular length/part number?

 

[pomester]

Any particular length/part number?

Go to the ARP website https://arp-bolts.com/ and there should be a calculator for ordering studs measuring off the original bolts. When I was doing a Ferguson the company was very friendly helping me size what I needed. They are not cheap, but I doubt OEM bolts are either. I think it's generally conceded that studs are superior to bolts in this application.

Here's a couple pictures of a Ford 4-cylinder application.

 

[Cutlass327]

Go to the ARP website https://arp-bolts.com/ and there should be a calculator for ordering studs measuring off the original bolts. When I was doing a Ferguson the company was very friendly helping me size what I needed. They are not cheap, but I doubt OEM bolts are either. I think it's generally conceded that studs are superior to bolts in this application.

Here's a couple pictures of a Ford 4-cylinder application.

Thank you!

 

[Destroked 450]

Why do you want to replace them, they are not torque to yield junk that’s used today

 

[Cutlass327]

Why do you want to replace them, they are not torque to yield junk that’s used today

My luck is that they will be pitted from corrosion or whatever.. do any go into coolant passages? I'm not familiar with industrial diesels, only automotive.

 

[Destroked 450]

On those engines all of the head bolts go into blind holes
Naturally checking for pitting especially near the bolts head and base of the threads is important
Guess I’ve been lucky but having worked on and owned Ford tractors for over 50 years I don’t remember having to replace a head bolts, if I did it was with another used bolt from a scrap engine

 

[Cutlass327]

Ok, that saves me time and money - I'm always happy for that!