Deere MT with wide front end

Hugh MacKay

Well-known Member
Around 1965, a neighbor of mine had a John Deere MT with wide front, he had bought it new around 1950. When he retired he sold it separate from his farm, and I have no idea where it went to. I forget whether that wide front was round or square. I did drive that tractor once, but don't remember.

Since I've been on YT close to 8 years now, and almost weekly in the classifieds one sees an MT for slae but they are always narrow front. How rare were MT's with wide front? Quite frankly, I've never seen another since my neighbor's in the early 60s.
 
There sure were lots less MTs made with the wide front than with the tricycle front end, but I doubt that there are accurate records of the numbers anywhere. They are of a round tube design. In fact there were two widths of wide front, 48 to 68 inches and 68 to 88 inches. One of the two MTs my dad had in the 50's was a wide front. I know where that tractor is but can't get it bought. I've priced wide fronts a few times for my MT but the last one was all rusted out and the guy wanted $700 for it. Five or six years ago I saw one or two for sale at about $500. Sure would like to have one.
 
We have a MT but it's a Tri-cycle. I think what set the wide front MTs apart from the Ms which were all wide front utility models is that the wide front MTs were built for row crop work.HJ
 
The Model "M" tractor was made during production years 1947 through 1952 -- and appeared on the market with wide front. The first variations came in with the 1949 production year. One is the "MT" or "M"-Tricycle, and the other the "MC" or "M"-Crawler.

And so if you take this for what it's worth -- from a Deere publication -- you have (by definition) that a tractor described as model "MT" WILL NOT have a wide front end. For that, look for model "M".

And so while I welcome corrective comments, I would imagine a wide front MT would be not only rare but un-original! Further, I would ascribe no added value to an "MT with a wide front other than for the wide front to be used on a genuine model "M" tractor! (PatB)
 
I would have thought some of the Dubuque experts would have chimed in, but they must be busy in working on their latest finds.

So this is how it goes:
An MT is a two row tractor with adjustble wheel spacings. An MT could have come with a narrow front or an adjustable wide front. An MT would have been fitted with two row cultivators and dual touch-o-matic so that the front cultivators could be lifted before the rear when reaching the end of the field. The MT later became the 40T which could also have been ordered with an adj. wide front. There seems not to be just a whole bunch of the MT's with a wide front for whatever reason.

An M is a "standard" so to speak. It is a one row tractor (straddle the row) and has a little shorter rear rubber than an MT. The M has single touch-o-matic so that all parts of the cultivator lift at one time. The M later became the 40 standard.

If you're writing another book you better ask some of the real experts who really know their tractors. Maybe ask a little later if you dont get a response from Wayne in TN. I think he knows his Dubuques pretty well.
 
The "M" was a different fundamental chassis from the MT. I only made a cursory seach, but from the parts book, the "M" was offered only with WFE's, but in several variations (see pgs. 70-2,4,6,8 of PC848). The "MT" which was marketed mostly as a tricycle, but it had its own option for dual front wheels, single front wheel,and also has its own WFE option (see composite illustration).


Frank

MTfrontends.jpg
 
Frank -- Thanks for jumping in there. All I know first-hand about the "M" series is from the often-errant booklet "John Deere Tractors, 1918-1987", and a brief period of MT ownership which I do not want to repeat. (PatB)
 
Frank: Thanks for the option diagrams. I have since e mailed the son of the original owner of the MT I remember, and he confirms it was round axle as shown in your diagram. He also tells me he was with his dad when he bought it new in 1950 and the tractor had been ordered in with the wide front, thus it was a factory original.

I could have bought that MT in 65, and probably for less money than one would pay today for one unrestored, however I thought I was too hard up. Oh, the mistakes we make in life. I've never seen another MT wide front since.
 
The Model "M" tractor was made during production years 1947 through 1952 -- and appeared on the market with wide front. The first variations came in with the 1949 production year. One is the "MT" or "M"-Tricycle, and the other the "MC" or "M"-Crawler.

And so if you take this for what it's worth -- from a Deere publication -- you have (by definition) that a tractor described as model "MT" WILL NOT have a wide front end. For that, look for model "M".

And so while I welcome corrective comments, I would imagine a wide front MT would be not only rare but un-original! Further, I would ascribe no added value to an "MT with a wide front other than for the wide front to be used on a genuine model "M" tractor! (PatB)
 

Attachments

  • Screenshot_20261025_221356_Photos.jpg
    Screenshot_20261025_221356_Photos.jpg
    571.6 KB · Views: 0
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top