Hydraulic pump for 450 and 300

[Kelly in tx]

Where do I get a good, cheap hydraulic pump for my Farmall 450 row crop? Is it the same pump as for the Farmall 300? What gaskets do I need and where do I get them? Thanks, kelly

 

[PSI28]

Hey Kelly, nope they aint the same pump.
Yer 450 shares the pump with the M, Super M and 400, the 300 runs a smaller one. Gas or diesel matters too so make sure to check yer serial tag.
Steiner or Abilene has em and the gaskets usually come with it. If yours aint scored internally, a rebuild kit is way cheaper.

 

[the tractior vet]

Hey Kelly, nope they aint the same pump.
Yer 450 shares the pump with the M, Super M and 400, the 300 runs a smaller one. Gas or diesel matters too so make sure to check yer serial tag.
Steiner or Abilene has em and the gaskets usually come with it. If yours aint scored internally, a rebuild kit is way cheaper.

Your spinning your wheels on tryen to rebuild a OLD Hyd pump as you have no means of any machine work needed to bring this back into tolerances .and after ya up and done dropped the bucks on the rebuilt kit and get no Joy you no3w have added time and money just to go and buy a new pumps any way.

 

[the tractior vet]

Where do I get a good, cheap hydraulic pump for my Farmall 450 row crop? Is it the same pump as for the Farmall 300? What gaskets do I need and where do I get them? Thanks, kelly

There are NO CHEAP Hyd Pumps any more . Long gone are those days . I use to sell one of them new pumps for 325 . NOT NO MORE. Your looking at the bottom of the barrel of 450 to 525 . Remember your dollar bill is not work a buck any more . And today everybody wants to get rich quick.

 

[wwoodrow]

Where do I get a good, cheap hydraulic pump for my Farmall 450 row crop? Is it the same pump as for the Farmall 300? What gaskets do I need and where do I get them? Thanks, kelly

Try these folks. I got one for my 424 from them that has worked well. It was about 60 % of what other folks wanted . [email protected]

They are in Oregon if memory serves .

 

[wwoodrow]

There are NO CHEAP Hyd Pumps any more . Long gone are those days . I use to sell one of them new pumps for 325 . NOT NO MORE. Your looking at the bottom of the barrel of 450 to 525 . Remember your dollar bill is not work a buck any more . And today everybody wants to get rich quick.

I agree on trying to rebuild used pumps. I did replace a seal on one that was pumping hydraulic oil into the crankcase once, but that just bought time for a couple of years until pump got too weak.

 

[flmeredith]

this guy parts out a lot of the older IH tractors , Tim Adkins 260-704-5853 ,he will ship parts , a good man to know