Ford 8N 12V EI conversion

Those look like SS it would be a shame to paint them... I think you took my Whoo Hoo !! wrong your 48 did not buy much hardware : (. That bench grinder has went up several hundred in the last 5 years. It does take on all commers and will be the last one you will buy : )...
I love my new $2 bolts! I was looking at them again this morning. I cannot lie, I love new bolts.

$48 doesn't buy much of anything anymore.

I spent more dollars at Lowes for 7/16 bolts, nuts, and washers.

What bench grinder???
 
I took off the starter housing, and still could not get the starter out past the ring gear.

It took a bit of work to put back together because the brushes were sprung out and would not go back over the commutator without intervention. So MacGyvered it and got it all back together.

Bare foot tractor repair is highly unorthodox and not YT approved! :rolleyes: I see Hobo instructed you about the brush springs. I just take a sufficient tool that can hold them away from the end of the brush holder. Then push the brush in even with the inner end of the holder. Then I just let the spring rest on the flat side of the brush to hold it in position. Then when assembled orientate the brush and spring into the proper positions.
 
I love my new $2 bolts! I was looking at them again this morning. I cannot lie, I love new bolts.

$48 doesn't buy much of anything anymore.

I spent more dollars at Lowes for 7/16 bolts, nuts, and washers.

What bench grinder???
Post #78 "This Thang" (link) Once I worked my way up to a nice 10" bench grinder there was no going backwards. Maybe I should call it a rocket launcher as it has put some bolts in orbit they have never came back to earth.

I have a industrial supply house close by they sell fastener hardware at a decent price.
 
Bare foot tractor repair is highly unorthodox and not YT approved! :rolleyes: I see Hobo instructed you about the brush springs. I just take a sufficient tool that can hold them away from the end of the brush holder. Then push the brush in even with the inner end of the holder. Then I just let the spring rest on the flat side of the brush to hold it in position. Then when assembled orientate the brush and spring into the proper positions.
Yea I do whatever I can barefoot!

Thanks for that info. Yea I guess I could have learned that if I looked it up but I think I had more fun acting like Maguyver with popsicle sticks.
 
Post #78 "This Thang" (link) Once I worked my way up to a nice 10" bench grinder there was no going backwards. Maybe I should call it a rocket launcher as it has put some bolts in orbit they have never came back to earth.

I have a industrial supply house close by they sell fastener hardware at a decent price.
Oh, I see thanks. I didn't notice the link before.

Funny thing is I haven't installed or used my bench grinder and have been at this house 3 years. I just bought a stand for it at HF and plan on installing it soon so that I can use it for mower blades because I bought a Wheel Horse from the 80s and the mower deck is coming soon.

But I just have a HF grinder so I'll probably be happy with that thang.
 
no return on the investment of money on the conversion From 6 volt to 12 v is there? what do you have in this 1200 ?
 
If you can get that N to start and stay running like a 140 I will take a dozen of'em.
Everybody wants one of these Fords. That's how I'm seeing it. That's what I hear.
So yea, my goal is first to build a reliable one for my own and then do it again and again for friends and family and then others.
We already have 2 other Fords in the barn at Junior's farm. An 8N and a 9N.
The 8N is in terrible condition, rusted and motor frozen. But we are up for the challenge.
Junior is very excited about them and tractor work in general.
Last evening we talked about me bringing my 8N to his shop after the Super 90 gets out of there so that we could do the work together and he'd know what to do for the 2nd 8N sitting in his barn.
So yea I'd like to figure it out and then keep snagging them out of fields and fix them up. I have a heart for these old tractors and it's something I really want to save.
I think they are really cool. And I want to basically derust and paint them with Rustoleom Ford colors in the Farm and Implement enamel...not professionally or sandblasting or anything, but a basic paint job that will look better and slow the rust.
I told Junior our goal is to buy non-running tractors to save them from the scrap yard and do the whole restoration on them. No fixing tractors for a couple three hundred dollars. We want to do thousands of dollars of work and provide good running decent looking tractors that will last a few more years with limited trouble.
Feasable? We will see.
Fun? For sure.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top