Argon/CO2 Regulator

KCTractors

Well-known Member
Location
Central Wi
My argon/co2 regulator is leaking so I will have to replace it. I have been looking on line and prices are all over the place from $25 to $200. What is the difference in between the cheaper and the expensive units? Don't tell me $175.
 
Amazon has a bunch of them in the $20-$30 range. Most with good ratings.
Harbor freight has two that are a little more expensive, also with good ratings.
 
I see all of them,for home /farm shop use ,the cheaper the better. Welding 10 hours a day buy, a brand name.
 
i only buy what can be repaired in 40 years i have had very minimal repaires few gauges a few diaghrams , thatts it with10 regulators on bottles
 
I have been looking for one online today as well. I have narrowed it down to a Smith brand from a welding supply store. My CO2 tanks need a female end on the regulator, which is hard to find.
Straight Co2 is a different animal than 75-25. Straight Co2 will freeze the regulator at high flow rates and there are special regulators for that purpose. Some have fins on them and some have a heating element in them. You can use a standard regulator for a short period but it will start to freeze up after a time. I use about a 50# cylinder a month. Much cheaper than 70-25.
 
I have been looking for one online today as well. I have narrowed it down to a Smith brand from a welding supply store. My CO2 tanks need a female end on the regulator, which is hard to find.
Just buy a regulator for CO2,or buy the adaptor that any welding store have in stock. Or buy the nipple and change it on the reg.(adaptor is easier.)
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top