(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. O

    What Is This Plug Called Claas 62S Round Baler

    So my search for a round baler has landed me with a Claas Rolland 62S with net wrap. Clean original baler. 2 owner. Bought it from a college buddy. Owning a German baler definitely wasn’t on my bingo card but the price was too good for a new wrap baler. It has this weird 3 pin plug for power to...
  2. O

    Vermeer Round Balers

    Still on the hunt for a cheap round baler. Missed the NH I was looking at a few weeks ago. Always heard good things about Vermeer, just never was much around here because there wasn’t a dealer close by until relatively recently. Found a dealer a few hours away that has both a pretty decent...
  3. O

    New Holland 847 Chain Baler

    Looking to buy a cheap round baler to take some first cutting load off the square baler and give me a backup in case of weather or mechanical problems. I’ve been around chain balers a fair bit but never an 847 specifically. Found a super clean original one fresh out of the field last year for...
  4. O

    5th Wheel running gear for hay wagon

    Has anybody ever used a 5th wheel gear to put a hay rack on? Would like to build another wagon and have the opportunity to buy some nice used Clark anhydrous tank gears for scrap price. I’m worried about stability in turns. These are the low frame gears for putting it on pre plant not high arch...
  5. O

    Oliver 82 Mower Parts

    Needing pitman arm hardware for an 82 mower. Mostly the break away parts. Both halves and the latch handle. Parts Depot recognized the part numbers but didn’t show any stock. Unfortunately don’t have any other books to see if it is the same break away on the 22’s or 415’s. Anybody have any...
  6. O

    ScooterGMC

    Saw that the entire west coast is under a tsunami watch after that Russia quake. I’m guessing you’re far enough inland to not be bothered by it but I knew you were out there so figured I’d check in.
  7. O

    Jacobsen Chief Series 540 PTO Attachment

    I posted this in the garden tractor forums as well but don’t know how much traffic goes through down there so I figured I’d hedge my bets up here as well. So I recently ran across an old 1966 Jake brochure that showed a front mounted 540 pto mule drive on a super chief 1200. I’ve got a barn...
  8. O

    Jacobsen Chief Series 540 PTO Attachment

    So I recently ran across an old 1966 Jake brochure that showed a front mounted 540 pto mule drive on a super chief 1200. I’ve got a barn that has a very tight area to get a hay elevator in and even tighter to get a tractor in there to run it. I’ve got a 68’ Moline 120 hydro that would be the hot...
  9. O

    4-270 Serial Numbers

    Does anybody have the serial number lists for the 270’s? Went and looked at one yesterday I want to possibly buy and just want to know the year on it. Looked online with no luck. Serial number on the tractor is 302677-432 if anybody can do anything with it.
  10. O

    3208 Cat Oil Cooler Hoses

    Need to replace the 2 short moulded oil cooler hoses on a 3208. Part numbers 4N483 and 9N482. Ordered them from Cat and the ones that showed up are the ugliest blue color you have ever seen in your life. Probably ok if they are buried under a truck hood where you aren’t going to see them but...
  11. O

    Case 310C Dozer Parts Sources

    To cut a very long story short. After being out of the family since the late 70s, yesterday dad and I were finally able to buy back the 310 gas dozer my great grandpa Roundy bought new. It’s had 2 In between then and now. The guy that initially bought it off my grandpa had it sent to a Case...
  12. O

    Vintage Chainsaw Fuel Mix

    Bought a nice original 1961 David Bradly Sears 758G chain saw at an auction this weekend. Went for cheap and always wanted an old saw to play with. Want to try to get it running so have a question on the fuel. Got the manual with the saw and it says .75 pints of oil/gal of gas or 12 fluid...
  13. O

    Moline Auction: Lots Of Power Units

    https://www.metzgerauction.com/auction_info/5859 Figured some of you might like a heads up. Lots of Moline power units. A 2890 combine and a mess of Uni’s. Located in Mentone Indiana.
  14. O

    Glencoe Soil Finisher Blades

    Have an old Glencoe SF249 soil finisher that is in need of some tlc before spring. Need to put new disk blades on it but have not been able to find what size it’s actually supposed to have. The book I have for is says part# P-6604….. Disk Blade. Real helpful description. Agco parts books is no...
  15. O

    Bruce in Canada

    My combine tracks showed up today. Had Bryans haul them. They were excellent to work with. For 1300 bucks they picked them up. Did all the border customs bs and dropped them at my door. Couldnt really argue with that. Was painless enough Im probably going to start looking for more equipment...
  16. O

    Deere 9600 Combine Warm/Hot Start Issue

    So for reference this machine has approximately 250 hours on a Reman Deere Long Block engine and a Deere Reman injection pump so Im not 100% ruling out mechanical issues I just have a hard time believing thats the problem. Machine cold starts excellent. However if you start it and run it for...
  17. O

    Is This A Real Thing

    Was thumbing through a tractor magazine and saw and add for a toy auction. One of the toys pictured was this thing. Is it just some custom builder with an active imagination or is it a model of a real Deere experimental piece? Looks like a self propelled corn sheller.
  18. O

    Interesting Use For Some Crab Steers

    I dont know if I would call it cool. By the sad shape of the tractors more like cruel and unusual punishment. But definitely interesting. Figured Id share. Launching a boat.
  19. O

    Equipment From Canada To US.

    Looking at a set of combine tracks and cart in London Ontario. What kind of nightmare is it to get equipment over the border into Michigan? All the flatbed truck drivers I know gave up their documentation for border crossings because it got to be to much of a headache. Are there any hot...
  20. O

    Duals on Oliver 7300

    We have had 5.25 inches of rain since October 5th with little to no sunshine in between to dry things out. Now a lot of fields are to the point where just walking across them can be a chore. Yesterday was the first time since October 4th that beans have been dry enough to cut and haul in...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top