Search results

  1. O

    Oliver 1750 hydraulic pump

    anyone have any experience with oliver 1750 hydraulic pumps? A friend says none of the aftermarket pumps are any good, failing in 50-100 hours. He says only the original Agco pump is worth the trouble to install. This is supposed to be from several different installations so not the same person...
  2. O

    m f hydraulics

    friend has a 4243 mf with 900 hrs and asked why 3 point cycles with bale on fork and less than all the way up. steady when at the top. remotes work fine. Probably has only used on bushhog with cylinder before. any ideas? oil is good and full. I am not good on hydraulics and especially...
  3. O

    mf 245

    A friend has a mf 245 that will no longer run over 1400 rpm. getting plenty of fuel, clean filters, lube in the fuel.open return line, air system is clean and open, rebuilt injection pump about six years ago,probably less than 500 hours. It starts normally and runs smoothly and has enough power...
  4. O

    towing sos ford

    I am acquiring an sos tractor that is not runnable at this time and I remember there is a way to tow it when not running. I owned such 50 years ago, but never had this issue. I seem to remember there is a disconnect somewhere that releases it for towing. I do remember the transmission locks...
  5. O

    white 2-85 oily clutch

    guy has 2-85 white and gets rearend/trans oil on clutch. trns input shaft been replaced along withnew trans lube pump and all seals in trans smells as 80/90any ideas?
  6. O

    iseki/white fan blade

    we have a 2-65 iseki sold by white that has an Isuzu diesel engine that needs a replacement engine cooling fan. The original was plastic and is disintegrating. has anyone solved this problem differently than going electric?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top