-
R
Leak under my 3400 1974 tractor
I was moving some round bales today and on the last one I saw a bad leak underneath the tractor. The front loader was lifting a round bale and the rear lift had the post hole digger lifted. I haven t taken the time to look at it closely but I took some pictures. Best guess? Thanks This... -
R
1977 Ford truck value
I need an opinion of this truck's value. 1977 Ford custom farm truck still drives. I've had for 20 years and has served me well when needed. It's got 64,000 miles on it. I recently inherited my Dad's truck and no longer need this guy. I'm not sure of the best way to sell him and what is his... -
R
1977 Ford truck value
I have a 1977 Ford truck Custom F150 that I'm ready to sell. He's a farm truck that I have used for the past 20 years. He runs. I have inherited my Dad's truck and don't need him anymore. Does anyone have an idea of his value?- rking
- Thread
- Replies: 4
- Forum: Classic Trucks
-
R
reciprocating battery powered saw
Any option of a good battery powered reciprocating saw for home owners use. I have a corded DeWalt which has been good for many years. The battery powered equipment is pricey. -
R
shop radio
Does anyone have a recommendation for a shop radio? I carry it with me around the pasture so it has to be sturdy. I just trashed one that that kept cutting in and out. -
R
ford 3600 leaking antifreeze
I was going to use the post hole digger on my tractor for pen repair and I saw the radiator needed fluid. I added about 1 gallon of water/antifreeze solution. When I started the tractor, I noticed a small amount of spray but nothing major. I dug my two holes but on the second one the leak had... -
R
RE: Hose Connector on Front End Loader Thank you
"I see said the blind man." I went to town and had a new hose made and now realize that the 90 degree hose connector is one piece. In my ignorance, I thought it was two pieces. Barnyard Engineering was right that it was expensive-$62. I may have gotten taken on the price at the tractor...- rking
- Thread
- Replies: 1
- Forum: Tractor & Farm Talk
-
R
Hydraulic hose on front end loader problem
I have a four 3400 tractor with a front and loader. The hydraulic hose for the lift cylinder on the left side came off yesterday. I tried to reattach it but was an able to get it to screwback on. There doesn't seem to be any screw threads on the female screw. This is my first experience with...- rking
- Thread
- Replies: 13
- Forum: Tractor & Farm Talk
-
R
Hi Lift Jack/Farm Jack
Thank you so much for the information about "farm jacks". I had used my neighbor's jack for years-an old reliable one- and since I bought this new TSC one it has never really worked right. I currently have the tractor jacked up but can not lower it. I am going to buy a good quality Hi Lift... -
R
HIgh Lift Jack
Going to buy a High Lift jack since the one I have from TSC is stuck in the raise position only. Does anyone have any opinions of a good brand to buy? I am using this jack to change a front tire on my tractor -
R
riding lawn mower electric start
I have a Snapper 28 inch cut manual pull riding lawn mower that I would like to replace with a battery start riding mower. We have had Snapper mowers for years and they have lasted well for us so I was thinking of going back to that brand but I was wondering what experience ya'll have had with... -
R
Oil Change on 3400 tractor
Hi all, I changed the engine oil on my 3400 tractor yesterday. I checked the dipstick yesterday and again today I have overfilled the level a bit. Is there a problem with overfilling the engine oil? Should I open the drain plug and let some out? Thanks for all the advice everyone... -
R
Problem encountered while draining old antifreeze Ford 3600
I read the posting about radiator flush and refill with new antifreeze by ml_work on his Ford 4000. I was encouraged to give it a try on my Ford 3600. Previously had been only adding to the radiator as needed. Got both the radiator drain open with difficultly (had to bend the wings off and... -
R
front end loader grease
I was wanting a recommendation for grease for my loader for the 3400 ford tractor. I am out of the red tractor supply grease that I use for greasing other tractor fittings. Was just wondering if there is any difference in grease to be used for the front end loader. Thanks -
R
Year of my 3400 tractor
Was wondering what year my tractor was built... I found these numbers on the engine block: DONN 6015 J 60L (L maybe C)14 *0621 317* 4020B On the front end loader:290349 with an S in a circle I think I have a 730 or 735 front end loader not sure. Rear Axle... -
R
Grease fittings 101
I am spending the morning checking fluids on my 3400 tractor and lubricating the grease fittings. A number of the fittings on the front end loader will not accept any grease. I saw there was a tool to "unplug" grease fittings and wondered if it was worth buying. (Or should I replace the... -
R
bucket removal from a 3400 industrial ford tractor
I just got a hay fork for the front loader on my "new to me" industrial 3400 ford tractor. I am getting ready to remove the bucket. Is there any smart way to leave the bucket for easy reattachment? Certain way to tilt maybe... Any hints or suggestions are appreciated. I have never done this... -
R
hay spear for an industrial 3400 ford tractor?
I just bought a tractor with a front end loader and am interested in buying a hay spear for the front end loader. It is a universal attachment. 38 inches across. 2 pens on each side-12 inches between the 2 pens. I have never had or used a hay spear and I see some are advertised to attach... -
R
Have a bush hog SQ720 shredder slip clutch that I am trying
I have a bush shredder slip clutch that I am trying to reassemble. One side comes together tightly but the other slide is about 1 inch apart. Have taken it apart and back together twice?? I thought I had burned up the slip plates but after looking at them and buying replacement plates, I... -
R
Help! Bush Hog Slip clutch-Smoking- now replaced plates but
I was shredding some heavy brush and saw my slip clutch on my bush hog smoking. (Squealer SQ 720) I have a Ford 3000 tractor and have been shredding heavy weed growth as well as rosehedges that I have previously sprayed. Lots of gopher mounds in the pasture also. To make a long story short...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy