(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. R

    IH 684 Fuse Block PN# 3129948R1

    Thanks. I had seen that earlier but hadn't reached out to them. After doing more research I found a company, Porch Electric, in Illinois that specializes in Farmall, IH, & Cub Cadet wiring harnesses. They were super friendly and offer a means to replace the current fuse block with a new fuse...
  2. R

    IH 684 Fuse Block PN# 3129948R1

    The fuse block on my 684 has a couple of fuse clips that are no longer working and I'm having to jump a direct wire from the battery with an inline fuse to feed the lights and other things. Needless to say, this isn't a very good idea. I want to go ahead and replace the fuse block but when I...
  3. R

    Need Knotter Frame Needles for NH 273 Baler

    I got my baler out for the first time in a couple of years to bale a few square bales and unfortunately the plunger stop didn't engage correctly and I broke both needles while trying to feed some hay into the chamber to get it ready to go. Also, when I looked at the left side knotter frame I...
  4. R

    Removing Front end on Case 1070 with Broken Crank

    Thanks. I don't have a stand either but hopefully maybe able to borrow one. Is the front end doweled to the engine block or is it just held with the (4) 3/4" bolts?
  5. R

    Removing Front end on Case 1070 with Broken Crank

    I have a broken crank in my Case 1070 and wanted some opinions on whether I should remove the front end before I split the tractor at the flywheel in order to remove the crank. Which is easier and safer?
  6. R

    Lift Broken on Case1494

    Thanks for the info. It is a open platform so there is no cab to worry with. I haven't studied this out too much yet but when you talk about the selectamatic valve, does this mean I will have to remove all of the valves above to then get to the actual items that need to come off? I will start to...
  7. R

    Lift Broken on Case1494

    I just bought a Case 1494 at auction and learned that the lift didn't work right. Long story short...I have torn into the left side rocker shaft side and found that the splined casting that has the ball shaft that is driven from the lift cylinder has snaped off. It looks like the casting bore...
  8. R

    Need York AC Compressor for 1070 Case

    Looking for a good York model compressor that will fit my 1070 series. Mine lost cooling and when I put in some freon to recharge I found that the housing has a leak on the side so I"m looking for a good replacement.
  9. R

    1070 Power Shift Troubles

    Thanks for your feedback. Since this is something that I haven't done on this tractor before and knowing that I have a few doubts about handling this one myself, I am just looking for the most logical place to start. Sounds like I need to quit hopeing for an easier way out but I think I need to...
  10. R

    1070 Power Shift Troubles

    Serial# 8809016 All hydraulic and steering still work. Everything that people are telling me leads me to believe it maybe the TL or loosing a gear from the sliding shaft. It doesn't seem like there is any use to dig into the control valve at this point since it doesn't appear that it would be...
  11. R

    1070 Power Shift Troubles

    Yes, the PTO and all hydraulic functions still work and I can shift it thorugh all the 4 gears without the clutch so it seems like you are telling me to look at the torque limiter. Since you say you have done this before, when this happened to you did you have any symptoms that led up to this...
  12. R

    1070 Power Shift Troubles

    I do still have all other hydraulic functions(brakes, steering,lift,remotes) and the PTO works so everything seems OK except it will just not MOVE!! What seems strange to me about this is that I had not seen anything prior and when this happened it was not done under a load just a simple clutch...
  13. R

    1070 Power Shift Troubles

    Tractor Serial# 8809016 Transmission Serial# 10040323 Seems like I'm headed for a split apart??
  14. R

    1070 Power Shift Troubles

    Never had any issues before but was using it to move hay rolls and when shifted to reverse nothing happened. Will not go forward or back. Pulled access cover to see hydraulic control valve and all the linkages are intact and the clutch spool and power shift spools all go through the motions but...
  15. R

    Need Left Hand Steering Arm for 830 Case

    Thanks for the advise...it is worth a try.
  16. R

    Need Left Hand Steering Arm for 830 Case

    Would like to find a nice used left hand steering arm (PN A24653)for an 830 Case. Not sure about the spindle but the splines on the steering arm are worn on mine and would like to find a good one to replace it to see if this will tighten up the steering. Can call me 270-779-6230 if you have one...
  17. R

    Need 28 Rim for a Model 40

    Tom, If you can e-mail me the details that would be good. [email protected]
  18. R

    Need 28 Rim for a Model 40

    I need a 9 lug 28" rim for a Model 40. Anyone got one?
  19. R

    Help with 1985 IH 684 Steering Problem

    I have had it to a IH Dealer who replaced the Multiple Control Valve (I got from a salvage yard)and it worked OK for a couple of hours and then it"s back to basically no steering just like before. For the first couple of times it seemed to get a little better right after I changed the filter but...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top