(800) 853-2651
SHOP NOW

Search results

  1. M

    730-830 tractor heads

    I am working on a 1963 730 Case Diesel. It engine has been apart for about 4 years in my dads shop. Dads gone now and Im putting it back together. My problem is there is 2 sets of heads in the shop. I think one set is off a 830 case and one hopefully for this tractor. How do I tell them apart...
  2. M

    1586 clutch plate

    We put in a 8 plate clutch in this 1586 4 years ago. It had a 6 plate clutch in. I had a eager 14 year old boy driving it with a 25 ft disk when it out. I had just talked to him about not stopping at the ends to lower and raise the disk. The clutch disk blade is warped and has a blue tint to...
  3. M

    1586 slow hydlolics

    I am running a 1710 9 shank JD chisel plow on my 1586. After about 4-5 acres the plow becomes very slow to lift out of the ground.It becomes so bad you have to stop and wait for it to lift. Sometimes you can help it in backing up a little. Oil level is good. What should I be looking for? Is my...
  4. M

    International 850 feed grinder

    I found a 850 feed grinder in fairly good shape. But for some reason there is no grinding screens in the feed mill. I have a arts-way 420 feed grinder that I should retire. Does anybody know is I can use my 420 screens in this 850 feed grinder? I could take one of my screens from my 420 and see...
  5. M

    730 CK hudraulics from below

    I have a 730 CK Case. I put a 6 row corn planter on it loaded with dry fert and it lifts it of the ground. I plug a 5000 psi guage into my back hydraulics I think it was around 2500 psi. My 730 eagle hitch tractor would not be able to pick the planter up. Not sure, the eagle hitch tractor puts...
  6. M

    630-730 John Deere

    Hi The Tractor has to pull a 12 wheel rake for haying. Once a while grind feed. Maybe pick up on the 3 point a 800-1000 lbs hay bale. If needed in the fall run a 8 by 50 or maybe a 10 by 60 auger? No heavy tillage, but I have a 10ft drill or 6 row narrow corn planter maybe it could pull. I have...
  7. M

    630-730 John Deere

    I want to get a 620-630 or 720-730 John Deere. It will be a chore tractor. Use for haying, hauling manure,etc. Is one tractor better than the other? I do not find much price difference between the 630-730 tractors. The 720-730 tractor are offered in diesel. I am wondering about starting (pony...
  8. M

    756 or 766

    Is there alot of differense betwene the 756 and the 766 gas tractors? I have a 730 Case gas on a 7ft snowblower. After last winter in Minnesota, the Case being under powered and only having a high and low I want some thing different. I ran a ad in the Red Power Mag last issue for a 766 gas and...
  9. M

    7030 clutch

    Hello. I will have to check out the PTO. The power director still works and goes back to low when you push the foot clutch.
  10. M

    7030 clutch

    Baling third crop hay last summer I lost clutch pressure in my Dads 7030 tractor. Parked it for the winter. Got it in shop this spring. Very low on oil on dipstick under seat. Holds 7 gallons. put in five. I also found that I had a new oil leak. Still would not move very well. Found out I had...
  11. M

    343 corn head

    I just bought a JD 300 corn husker corn picker. It has a 243 corn head on it. I would like to get a 343, 3 row corn head for it. What number JD combine would I look for that might have this corn head? Thank you and have a great day.
  12. M

    1170 steering won't work

    I drove my 1170 in my Dads shop last fall. Over winter I worked on replacing the top cover in the rear end. This has the 3 point stuff in it. I started the tractor. My 3 point goes up and down with a 2100psi in the rear hydrolics. But I have no power steering. I had to take the main lines off...
  13. M

    1086 motor

    Hello, Looking at buying a 1086. Why Did International put in a 414 cid motor in the 1086 tractor? They put the 436 cid motor in the 986 and the 1486 tractors. I do not know much about the 1086 tractors. Are they a good tractor? Thank you and have a good day.
  14. M

    7030 Hyd clutch pressure

    Hello. You are right. I forgot about the Dipstick under the seat. I will check it out. Last July it was full when I put new oil in. I chopped 10 acres of cornstalks for bayling. Once I got going I did not stop. Hi and low worked good when I was working at pto speed. I never tried it at low...
  15. M

    7030 Hyd clutch pressure

    I'm having trouble moving my 7030 Allis. I can get it to move after playing with it. I put a pressure guage on the power director Transmission. The pressure at the regulating valve reads 145-150psi all the time except at idle. It should read around 200psi. I can put shims in to the pressure...
  16. M

    830 heads

    Im working on a 1963 830 Case-o-matic diesel. Found out I have a broken ring and a inside bad sleave. Sent the short block to the a local shop to get new sleaves. They found a crack between the 3 and 4 holes in the block. I found a 730 block of the same year to put in that checks out good. Does...
  17. M

    830 Temp. guage case-o-matic

    I would like to replace the Temp guage for the Case-o-matic in my Dads 1963 Case 830. Because the Case-o-matic oil go"s through the raditor could I use a water temp. gauge to replace it. Thank you and have a great day.
  18. M

    1586 clutch, trans, problems

    I was using my IH 1586 on a JD 30 ft field cult when it stopped dead in the field. The motor runs fine, all hydrolics work fine. I can put it in any gear and it will not move including reserse. The TA can be on or off still no moving it on its own. Whats should I look for? A friend of mine who...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top