Search results

  1. R

    Michigan

    Monroe Co. south of Ida kind of cool here today thats why I'm on here
  2. R

    Up date on rough running SC

    John, put Autolite 437 back in ,never have had any good results with Champions in any of my old tractors
  3. R

    Pictures for Don Rudolph

    Don, thought you might like to see these.
  4. R

    Up date on rough running SC

    Brought the SC back in and from suggestions I got ( plugs,timing .manifold) started with plugs they looked good not fouled but cleaned and regaped anyway, no change. Next went to the mag, tried moving to different settings still no change. this left no. 3 pull the manifold and check it out, but...
  5. R

    Brendon Warren

    Your WD in the mail yesterday
  6. R

    180 wiring diagram

    My operators man. has the diagrams for gas and diesel, tried to take pict. with phone but thats not going to work out. I can run a copy off if there is some way to mail it to you
  7. R

    Sc still won't run right

    Yes , wires are copper need to get her back over to the shop and try moving the mag. will see if there is any change
  8. R

    Sc still won't run right

    This is a picture of the problem child. In reading how dacaseguy described the way his was running, mine seems to be doing the same sort of thing.
  9. R

    Sc still won't run right

    The tractor is a 1950, it has a magneto (with eagle 0n it) didn't think it should be the plugs , used to take it on our tractor runs and it always ran like a charm just started this last fall when I was putting the old tractors up for the winter
  10. R

    Sc still won't run right

    Tried adj. the carb from suggestions from pref. post still won't run right. I hit the starter and she fires right up but soon as I give it some gas it wants to die. Also wants to run rough however if I pull the plug wires off and just set them back on so the the spark has to jump to the plug it...
  11. R

    just something I have wondered about

    Jusf looking at the post down a few about MF 50 paint colors, The MH 50 is really a nice looking tractor. I have always wondered why they went with the red wheels on the MH 50, if the MH line had continued were they considering dropping the yellow wheels, any thoughs on this ?
  12. R

    SC questions

    Bought this 1950 SC just like the one I grew up on, super clean and complete, How ever I have two issues with it. First the belt pulley will creep if the gear shift is in neural but not when in gear at an idle ,when in N if you throttle up it speeds up I have messed with the pulley brake but I...
  13. R

    444 Ps oil question

    I know what your saying and that the tractor hyd is running the pistons for steering, but the way I am reading is that there are two separate chambers and that the worm and rack , sector are in their chamber in 90w like a manual steering box and there is a 1/2 inch plug on top of the unit over...
  14. R

    444 Ps oil question

    Putting new seals in a PS unit, Reading in IT shop manual MF10, page 10 par. 19 Worm, rack, sector gear are lubed by 90ep oil in gear housing. Looked in the Ops manual page 24. steering housing oil- use 90ep on tractors with PS, fill 1/2 inch below plug. I assumed the whole PS unit ran off the...
  15. R

    Massey 44 special 3 point help needed!!!

    THERE IS A SCREW ON THE BACK OF THE CYL THAT CONTROLS THE THREE POINT OR THE HYD AUX HOSES. YOU TURN IT IN OR OUT FOR WHAT YOU WANT, IS IT IN THE RIGHT POS. FOR WHAT YOU NEED
  16. R

    Pennsylvanian?.question

    I'm the one you gave the no's for a seal on the bottom of the power st unit on a 444. I found a shop that is getting me seals for the steering rod input, from measurements. I was wondering if there is any way to get a copy {if there is a picture} from your parts book, I have a itt repair book...
  17. R

    MF20

    My 101 jr has done this a couple of times, runs on ether , fuel at the carb. Drove me nuts trying to figure it out, turns out the needle valve was sticking. try tapping on the top of the carb with a small hammer . seems to happen when they sit over winter, found the best cure is to shut the...
  18. R

    444 power steering leak

    Thanks I will check that out, by any chance did you change the input seal on the steering shaft ? If I have to pull the pump I might a well replace that as well
  19. R

    44/444 swap

    What I was looking to change out was the gear box under the radiator
  20. R

    44/444 swap

    Is there any reason that a manual steering gear out of a 44 would not fit a 444 (wide front ) My power steering unit is leaking on my 444 and so far I'm unable to find any information for seals. Not fond of this solution, but may be my only temporary fix until I find parts Thanks

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top