Search results

  1. T

    Contemplating rear wheel weight removal Farmall A

    The manual lift for the Woods L306A finishing mower. It is a big lever mounted to the side of the tractor that lifts the mower deck up and down. It has notches on a bar that sets the height of the mower deck via a chain attached to the mower deck that hooks to the end of the lever. This...
  2. T

    Contemplating rear wheel weight removal Farmall A

    I agree. Thank you all for the help.
  3. T

    Contemplating rear wheel weight removal Farmall A

    Thanks for all the replies. It does have 24 inch wheels. It does use some oil and leaks some. I have to add a pint about 3 times over the course of the summer. In addition today I discovered the manual lift was all the way down, one notch below where I usually run it. I felt pretty dumb then. I...
  4. T

    Contemplating rear wheel weight removal Farmall A

    Thanks for all the replies. It has the magneto and a new set of plugs gapped to the spec. It starts immediately from cold with little or no choke and purrs like a kitten. The blades on the L306A are new. The yard is fairly steep in places as my house is built on top of a hill. Not a steep hill...
  5. T

    Contemplating rear wheel weight removal Farmall A

    I need some advice. My Farmall A with a Woods L306A mower has served me well mowing close to 2 acres of grass all summer since I got it in 2016. It is starting to get a bit tired. I am having to get down in 1st gear on inclines it used to pull in 2nd. Is it worth the effort to remove the rear...
  6. T

    Farmall A loss of power and source of problem discovered

    I drained the tank and inspected everything thoroughly. I couldn't find anything. I took the sediment bowl apart and cleaned the internal screen There were a few flakes on the screen. I blew out the tank and line with the air hose and put it all back together. Sunday afternoon I strained the 7...
  7. T

    Farmall A loss of power and source of problem discovered

    Today before work I started draining the tank. I looked inside with a bright light and I can't see anything that could have blocked the hole. The tank looks clean to me. There are some tiny flakes visible in the sediment bowl. I guess it is possible but in my opinion unlikely that whatever it...
  8. T

    Farmall A loss of power and source of problem discovered

    I use my A with an L306A Woods mower to mow about 3 acres of yard every week or two. Last week I had an intermittent loss of power and misfire. I decided to check the plugs since they have never been changed. The Champion D21s installed by the previous owner were shall we say well worn after 3...
  9. T

    putting oil in drop axles on B

    I have a Woods L306A belly mower on my A and the mounting brackets block the access to the plugs. I bought the tractor 3 years ago and have mowed my 2 acre lawn every week in the summer so that really isn't very many hours when you think about it. The previous owner said all the fluids had been...
  10. T

    My new Farmall A

    Old link for picture broke
  11. T

    Happy Thanksgiving

    Eat up boys and girls as the calories don't count today :D :D :D
  12. T

    Made a trade for a Farmall C

    Truck is back up for sale. The buyer backed out when it came time to pony up the cash...
  13. T

    Made a trade for a Farmall C

    The deal for the C fell through. The transport cost for the dump truck was cost prohibitive so yesterday I sold it locally. The guy is supposed to bring cash today and drive it 5 miles home to his house.
  14. T

    Made a trade for a Farmall C

    I saw that too. Looks easy enough to fix. I was asking $1200 for the old truck.
  15. T

    Made a trade for a Farmall C

    Traded my 76 F750 Dump Truck for a Farmall C yesterday. The C has a newly rebuilt engine and a new clutch and new paint (dirty in the pics after bush hogging a 10 acre field and has been setting outside). I bought a newer and larger dump truck, an 85 GMC Brigadier tandem, so I put the Ford on...
  16. T

    hauling gas

    I am aware of that. Thankfully here in Northern VA they are pretty forgiving when it comes to agriculture and pretty much leave us alone. I usually use cans for transporting gasoline and bungee them so they don't slide around.
  17. T

    hauling gas

  18. T

    hauling gas

    Here is how. I refuel mine in the field with diesel. Gravity feed from an old saddle tank. We made a cradle and use a piece of pipe for easy pick up with the hay arm on my feedtruck. Works like a champ.
  19. T

    Farmall A with Woods L306 A final drive servicing

    Greetings All I have a question regarding final drive servicing with the mower and associated bracketry installed. I have had the tractor and mower set up 2 years and only use the tractor for mowing my 2 acre yard. It was a great investment and makes cutting the grass a pleasure. I recently...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top